XT60 Male Connector High Temp Nylon Housing

XT60 Male Connector, High-Temp Nylon Housing for RC Drone LiPo Batteries

This is a robust and reliable high-current XT60 male connector with gold-plated 3.5mm bullet pins in a durable, high-temperature yellow nylon housing. It is designed for secure, low-resistance power connections, and it ensures efficient current transfer in demanding applications.

The listing describes a mechanical mounting for the cable and soldered electrical mounting, with a gold flash contact plating.

It is a very common connector in RC drones and LiPo battery leads, so it is a useful item to keep in any workshop for building or repairing power leads.

Key features

• Gold-plated bullet pins: 3.5mm bullet contacts.

• High-temp nylon housing: durable yellow housing.

• Low-resistance connection: efficient current transfer.

• Soldered mounting: solder the cable to the contacts.

• Gold flash plating: resists corrosion.

How an XT60 connector works

A power connector is the link between your battery and everything that draws current from it. It has to hold securely, carry the current without heating up and, ideally, only fit together one way so that reverse polarity is impossible. The metal contacts are usually gold plated to resist corrosion, and the housing holds the two contacts apart and keeps them aligned.

Solder connectors with a clean, hot joint and enough solder to fill the cup, then slide heat-shrink over the joint so no bare metal is exposed. A cold or under-heated joint has high resistance and gets hot under load, which is the most common cause of connector failure. Always check polarity before you plug in a battery for the first time.

Choose connectors by the current they will actually carry, not just by how they look. A connector that is too small runs hot and can melt its housing, while a connector that is rated well above your load stays cool and lasts longer. Inspect connectors periodically, and replace any that show discolouration, loose contacts or cracked housings.