1 / 5Sold out · Ask us about restocking
Not available to order right now.
The UltraPower UP10 is a high-performance 2x100W dual-channel smart charger that supports AC/DC input and delivers up to 10A per channel. It is made for charging LiPo, LiFe, LiHV and NiMH battery packs and suits RC drones, FPV quads, RC cars, boats and airplanes.
With intuitive navigation, multiple safety protections and simultaneous dual charging, the UP10 aims to give hobbyists and professionals efficiency, reliability and flexibility.
A 2.4-inch 320x240 IPS LCD shows charging data clearly, and smart charging algorithms help you charge with the settings that suit each pack.
Dual channel output: charge two batteries independently at the same time.
AC/DC input support: power it from the mains or a DC source.
Wide battery compatibility: LiPo, LiFe, LiHV and NiMH packs.
High current charging: up to 10A per channel.
Smart charging algorithms: profiles for each battery type.
Intelligent LCD interface: a 2.4-inch IPS colour screen.
Built-in safety features: protections for safer charging.
Compact and portable: easy to carry between the bench and the field.
A smart charger does more than push current into a battery. A microprocessor monitors voltage and current throughout the cycle, follows the charge profile that suits the battery chemistry and stops when the pack is full. For lithium packs, a balance connector lets the charger see each cell separately so it can keep the cells at the same voltage.
Good charging habits matter as much as the charger itself. Check that the battery is not puffed or damaged, let a warm battery cool down before you charge it, use a lead that matches the connector, charge on a fire-safe surface and never leave a lithium battery charging unattended. Storing lithium batteries at a partial charge instead of full also helps them last longer.
Charging two lithium packs for FPV quads at once
RC cars, boats and airplanes with LiPo or NiMH packs
Field charging from a DC power source
High-current charging up to 10A per channel
A workshop charger for busy flying days
Input is AC 100-240V or DC 11.0-18.0V. On AC input, the combined maximum charge power of both channels is 100W; on DC input, each channel can deliver up to 100W. Charge current is 0.1-10.0A per channel, and discharge current is 0.1-5.0A.
Output voltage is 0.1-26.1V, the balance current is up to 500mA per cell and LiHV packs up to 4.45V are supported. Lithium cells: 1-6, NiCd/NiMH: 1-16, and lead-acid: 2V-24V (1-12 cells).
Input voltage: AC 100-240V, DC 11.0-18.0V
Output voltage: 0.1-26.1V
Charge current: 0.1-10.0A x2
Discharge current: 0.1-5.0A
Charge power: DC input 2x100W; AC input max CH1+CH2 = 100W
Balance current: max 500mA/cell
Discharge power: 2x10W
LiHV support: 4.45V
LiPo/LiIon/LiFe: 1-6 cells; NiCd/NiMH: 1-16 cells; Pb: 2V-24V (1-12 cells)
LCD: 2.4in 320x240 IPS
1 x UltraPower UP10 AC/DC dual charger
RC and drone pilots who fly several packs and want a dual-channel AC/DC charger with high current and a colour display.
Two, one on each channel.
Up to 10A per channel.
On AC input, the combined maximum of CH1 and CH2 is 100W.
LiPo, LiFe, LiIon, LiHV, NiCd, NiMH and lead-acid.
Yes, a 2.4-inch 320x240 IPS LCD.
One UltraPower UP10 AC/DC dual charger.
| Brand | UltraPower |
|---|---|
| Balance Current | 500mA per cell |
| Cell Configuration | LiPo/LiIon/LiFe 1-6S; NiCd/NiMH 1-16 |
| Channels | 2.000000 |
| Charge Current | 0.1-10.0A x2 |
| Discharge Current | 0.1-5.0A |
| Display Type | 2.4in 320x240 IPS LCD |
| Input Voltage | AC 100-240V, DC 11-18V |
| Power | 2 x 100W |
| Selling unit | PCS |
