1 / 2Sold out · Ask us about restocking
Not available to order right now.
The NEO-6M GPS module is a highly sensitive, low-power unit that delivers accurate location updates. It is compatible with Arduino and features an external GPS antenna and UART TTL interface, plus an internal rechargeable battery for quick starts and faster GPS lock.
Configuration settings can be saved to the EEPROM so they are not lost. The UFL connector simplifies antenna connection, a built-in ceramic antenna helps satellite detection and power and signal indicators show the module's status.
Three-millimetre mounting holes make it simple to attach to an aircraft. The listing says it can be used for smooth flying, automatic return home and waypoint navigation, and that it also suits smart robot cars.
56 channels: for position updates.
External antenna and UART TTL: a familiar, easy interface.
Rechargeable battery: quick starts and faster GPS lock, and data backup during power interruptions.
EEPROM: keeps settings from being lost.
Status indicators: power and signal LEDs.
Mounting holes: 3mm holes for simple attachment.
Ardupilot Mega v2 compatible: not for APM 2.8.
A GPS module listens to signals from navigation satellites and works out its position, speed and time. A flight controller or microcontroller uses that position for modes such as position hold, waypoint missions and return-to-home, or simply for logging where something has been. Supporting several satellite constellations means more satellites in view, which usually gives a faster and more reliable fix.
Mount the module as far as practical from motors, power wires and video transmitters, with a clear view of the sky, and let it get a full satellite lock before you rely on it. Poor mounting and interference are more common causes of GPS problems than the module itself. Keep the antenna face pointing up and secure the module so vibration does not shift it.
A first fix can take longer than later ones, particularly indoors or after the module has been off for a long time. A module with a backup battery or stored configuration can start faster the next time, but you should always wait for a solid lock outdoors before the first flight of the day.
Arduino GPS projects
Aircraft and quadcopters with Ardupilot Mega v2
Smart robot cars
Waypoint navigation experiments
GPS loggers
The page notes that this receiver module is NOT compatible with the APM 2.8 flight controller, so do not order it for that controller. The default baud rate is 9600 and can be configured from 4800 to 115200.
Input voltage is 2.7 to 3.6V. The module measures 23 x 30mm with an 18 x 18mm antenna and weighs 50 grams. The description states 10Hz position updates, while the specification table lists 5Hz, so treat 5Hz as the safe figure.
Model: GY-GPS6MV2 ceramic antenna
Input voltage: 2.7 - 3.6V
Baud rate: 9600 default (4800-115200 configurable)
Antenna size: 18 x 18mm
Module size: 23 x 30mm
Weight: 50g
Operating temperature: -40 to 85 C
Position update rate: 5Hz
Cold start: 38s; hot start: 1s
Tracking sensitivity: -162dBm
SBAS: WAAS, EGNOS, MSAS, GAGAN
1 x Ublox Neo-6M GPS module with EEPROM
Hobbyists and drone builders who need an affordable GPS with EEPROM and backup battery.
No. The page says it is not compatible with the APM 2.8 flight controller.
9600 by default, configurable from 4800 to 115200.
2.7 to 3.6V.
Yes, an internal rechargeable battery.
56.
One Ublox Neo-6M GPS module with EEPROM.
| Brand | u-blox |
|---|---|
| Antenna Type | Ceramic |
| Baud Rate | 9600 default (4800-115200 configurable) |
| Channels | 56.000000 |
| Compatible Flight Controllers | Ardupilot Mega v2 (not APM 2.8) |
| Input Voltage | 2.7-3.6V |
| Interface Type | UART TTL |
| Operating Temperature | -40 to 85 C |
| Update Rate | 5.000000 Hz |
| Weight | 50.000000 g |
| Selling unit | PCS |
