1 / 4Sold out · Ask us about restocking
Not available to order right now.
The TS832 48CH 5.8G 600mW FPV transmitter packs 600mW of clean 5.8GHz power. It is a good choice for pilots looking for longer range and locked-in video, without moving up to a much larger or more expensive video system.
It offers 48 channels compatible with the A, B, E and F bands and works with all FPV 5.8G receivers. The body is smaller and lighter than you might expect for 600mW, and it draws only about 200mA while transmitting.
On the open field, the 600mW output is rated for around 5km, and 5 to 8km with a bigger-gain antenna. Real range always depends on the environment and the receiving antenna, but the listing gives you a useful starting point for planning long-range flights.
48 channels: plenty of room to find a clear frequency when several pilots are flying.
A, B, E and F bands: compatible with the common FPV channel groups.
Smaller and lighter: easy to fit on a range of aircraft.
Works with all FPV 5.8G receivers: no special receiver needed.
About 200mA draw: modest current for 600mW of output.
Long range: around 5km in open areas, or 5 to 8km with a higher-gain antenna.
An analog FPV transmitter takes the composite video (and audio) from your camera and broadcasts it on a 5.8GHz channel. A receiver on the ground, in goggles or a monitor, tunes to the same channel and shows the picture. Each channel is a narrow slice of the 5.6 to 5.9GHz range.
Output power sets how strong the signal is. Higher power extends range, but it also generates more heat and draws more current, which is why the low 200mA figure quoted for this unit is worth noting.
Long-range FPV flying with a fixed wing or multirotor
Line-of-sight cruising where a stronger link helps
Adding a more powerful transmitter to an existing analog FPV setup
Sharing a field with other pilots by choosing among 48 channels
Pairing with a higher-gain antenna for extra distance
The transmitter runs from 7 to 24V and has a male RP-SMA antenna connector as listed, with a female RP-SMA connector on the transmitter itself. The box includes a cable and an antenna, so you can install and test it straight away.
Use a matching antenna and keep it clear of carbon fibre. Always check that your receiver can tune to the channel you choose.
Number of channels: 48
Rated power: 600mW
Frequency: 5.6 to 5.9GHz
Operating current: 0.22A
Voltage: 7 to 24V
Antenna: male RP-SMA
Operating temperature: -10 to 85 C
1 x TS832 48CH 5.8G 600mW transmitter with female RP-SMA connector
1 x cable for transmitter
1 x antenna for transmitter with male RP-SMA connector
Long-range FPV pilots who want a simple and affordable 600mW analog video transmitter with plenty of channels.
48 channels.
600mW.
7 to 24V.
The listing says around 5km in open areas, or 5 to 8km with a bigger-gain antenna.
A, B, E and F frequency bands.
Yes, the box includes a cable and an antenna with a male RP-SMA connector.
| Brand | Generic |
|---|---|
| Antenna Connector | Female RP-SMA (transmitter) |
| Channels | 48.000000 |
| Frequency | 5.6-5.9GHz |
| Input Voltage | 7-24V DC |
| Power | 600mW |
| VTX Power | 600.000000 mW |
| Selling unit | PCS |
