1 / 2Sold out · Ask us about restocking
Not available to order right now.
The TowerPro MG995 is a high-speed, high-torque servo motor built with all-metal gears rather than the nylon gears found in smaller micro servos, giving it considerably more durability when driving heavier loads or working against resistance repeatedly. Its stall torque runs from 10kg-cm at 4.8V up to 12kg-cm at 6.0V, several times the pulling power of a typical 9g micro servo, and it operates across a 4.8 to 7.2V supply range.
It uses an analog control system with a required pulse width of 900 to 2100 microseconds and a 5-microsecond dead band, giving accurate positioning and fast control response. Weight is 55g, with dimensions of 40.7 x 19.7 x 42.9mm, considerably larger than a micro servo to accommodate the stronger internal gear train and motor.
The product listing describes it as capable of rotating approximately 180 degrees in its title, while its own specification table separately lists an operating angle of 120 degrees; both figures come directly from the source listing and are noted here rather than guessed at, so it is worth confirming the exact usable rotation range for a given project before relying on either number. Wire configuration follows the standard servo convention: red for positive, brown for negative, and orange for the signal line.
It is rated for an operating temperature of 0C to 55C, and its constant torque delivery throughout the travel range, along with excellent holding power, makes it suited to steering, robot arm joints and other tasks that push back against the servo's own force.
RC car and aircraft builders, and robotics projects needing a servo with genuine holding strength for a steering mechanism, gripper or robot arm joint, will get real value from the MG995's metal gears and higher torque compared to a standard micro servo.
10kg-cm at 4.8V, rising to 12kg-cm at 6.0V.
All-metal gears.
4.8 to 7.2V.
The listing's title describes about 180 degrees of rotation, while its own spec table lists a 120-degree operating angle; check both figures against your specific use case.
Red for positive, brown for negative, and orange for signal.
| Brand | TowerPro |
|---|---|
| Gear Material | All-Metal |
| Rotation Angle | 180 degree |
| Stall Torque | 10-12kg-cm |
| Weight | 55.000000 g |
| Selling unit | PCS |
