1 / 3Sold out · Ask us about restocking
Not available to order right now.
This T-plug (Deans-style) connector is low-resistance and wear-resistant. It leaves enough space for alligator clips to fit, so you can clip on a charger if you attach these to an RC plane battery.
It provides a secure connection for battery and motor connections and eliminates the possibility of wrong polarity connections. It is ideal for current motors and batteries and suits lithium polymer batteries.
A sprung metal vane attached to each terminal helps prevent the connectors from coming apart accidentally during use.
Low-resistance and wear-resistant: made for repeated use.
Room for alligator clips: clip on a charger easily.
Wrong-polarity protection: the shape only fits one way.
Sprung metal vane: keeps the connectors together in use.
Rated 60A continuous, 75A maximum: for heavy loads.
A power connector is the link between your battery and everything that draws current from it. It has to hold securely, carry the current without heating up and, ideally, only fit together one way so that reverse polarity is impossible. The metal contacts are usually gold plated to resist corrosion, and the housing holds the two contacts apart and keeps them aligned.
Solder connectors with a clean, hot joint and enough solder to fill the cup, then slide heat-shrink over the joint so no bare metal is exposed. A cold or under-heated joint has high resistance and gets hot under load, which is the most common cause of connector failure. Always check polarity before you plug in a battery for the first time.
Choose connectors by the current they will actually carry, not just by how they look. A connector that is too small runs hot and can melt its housing, while a connector that is rated well above your load stays cool and lasts longer. Inspect connectors periodically, and replace any that show discolouration, loose contacts or cracked housings.
RC planes, helicopters and cars
LiPo battery leads
Motor and ESC leads
Charger connections
Battery repair and upgrades
The listing gives a continuous rating of 60A and a maximum of 75A. Materials are plastic and copper. The pack contains one male and one female so that you can wire both sides of a lead.
Solder carefully: the plastic housing melts if the iron is held on it for too long.
Type: Deans connector / T plug
Continuous current: 60A
Maximum current: 75A
Material: plastic and copper
Pair: male and female
1 x T plug (Deans) connector, male and female pair
RC hobbyists who use T-plug batteries and want a low-resistance, polarity-safe connector.
60A continuous and 75A maximum.
Yes.
Plastic and copper.
Yes, male and female.
Lithium polymer batteries.
One male and female pair.
| Brand | Generic |
|---|---|
| Connector Type | T plug (Deans), male and female |
| Continuous Current | 60.000000 A |
| Material | Plastic and copper |
| Max Current | 75.000000 A |
| Rated Current | 60 A continuous, 75 A max |
| Selling unit | PCS |
