1 / 5Sold out · Ask us about restocking
Not available to order right now.
The SkyRC iMAX B6AC V2 is the upgraded version of the well-known iMAX B6AC. Compared with the original, it is more accurate and stable and adds new features and functions.
Users can set the terminal voltage themselves and connect the charger to a PC for PC control and firmware upgrade. It can also be used as a lithium battery meter and a battery internal resistance meter.
It is a professional balance charger and discharger with microprocessor control, suitable for LiPo, Lithium High Voltage, LiFe and Li-ion batteries, with a max charge current of 6A and 50W charge power.
PC connectivity: PC control and firmware upgrades.
Terminal voltage adjustment: set the final voltage yourself.
Microprocessor controlled: accurate charging and discharging.
Individual cell balancing: keeps lithium cells even.
Delta-peak sensitivity: for NiCd and NiMH charging.
5-pack memory: store profiles for your packs.
Battery meter functions: lithium battery meter and internal resistance meter.
Store, time limit and input voltage monitoring: extra safety and battery care.
A smart charger does more than push current into a battery. A microprocessor monitors voltage and current throughout the cycle, follows the charge profile that suits the battery chemistry and stops when the pack is full. For lithium packs, a balance connector lets the charger see each cell separately so it can keep the cells at the same voltage.
Good charging habits matter as much as the charger itself. Check that the battery is not puffed or damaged, let a warm battery cool down before you charge it, use a lead that matches the connector, charge on a fire-safe surface and never leave a lithium battery charging unattended. Storing lithium batteries at a partial charge instead of full also helps them last longer.
Balance charging 1-6S LiPo, LiFe, Li-ion and LiHV packs
Discharging and storage-charging packs
Checking internal resistance
PC-controlled charging and firmware upgrades
NiCd and NiMH cycling and break-in
Input is 110-240V AC or 12V DC. The listing gives a charge current range of 1 to 5A, discharge current of 0.1 to 1.0A and cell count of 1 to 6S, with 50W output power and 5W discharging power.
The package includes an AC power cord with EU plug and a set of charge leads for XT60, JST, crocodile clip and Futaba style connections.
Charge current range: 1 to 5A
Discharge current range: 0.1 to 1.0A
Cell count: 1 to 6S
Input voltage: 110-240V AC / 12V DC
Output power: 50W
Discharging power: 5W
Balancing drain current: 300mA
NiCd/NiMH: 1-15 cells
Pb battery voltage: 2-20V
1 x SkyRC iMAX B6AC V2 charger
1 x AC power cord (100-240V, 50/60Hz, 16A, EU plug)
1 x DC jack to crocodile clips
1 x T connector to 4mm banana plugs
1 x XT60 charge lead
1 x JST charge lead
1 x crocodile clip charge lead
1 x Futaba style charge lead
1 x English manual
Pilots and hobbyists who want an accurate, PC-connectable balance charger with battery meter functions.
It is more accurate and stable, with terminal voltage setting, PC control and firmware upgrade.
1 to 6S for lithium packs.
110-240V AC or 12V DC.
Yes, it can be used as a battery internal resistance meter.
Five packs.
XT60, JST, crocodile clip and Futaba leads, plus DC and banana cables.
| Brand | SKYRC |
|---|---|
| Balance Current | 300 mA |
| Cell Configuration | 1-6S; NiCd/NiMH 1-15 |
| Charge Current | 1-5 A |
| Discharge Current | 0.1-1.0 A |
| Input Voltage | 110-240V AC / 12V DC |
| Power | 50W |
| Selling unit | PCS |
