1 / 4Standard checkout available. Verified maker dispatch.
The SimpliFly MK5 Pro is a 5-inch FPV drone frame for freestyle and custom quadcopter builds. The page says it is made of carbon fiber, aluminum alloy and TPU and supports modern FPV systems including digital air units.
A shock-absorbing structure helps minimise vibration, and the reinforced frame layout supports 5-inch propellers. It is suitable for beginner and experienced FPV pilots and is supplied as an unassembled kit. The page lists no wheelbase, weight or stack sizes. It showed only 4 left at Rs 4,479 (SKU TIFQC0212).
5 inch FPV frame: for freestyle and custom builds.
Carbon fiber, aluminum alloy and TPU: materials listed.
Digital air unit support: supports modern FPV systems.
Shock-absorbing structure: minimises vibration.
Reinforced frame layout: supports 5 inch propellers.
Unassembled kit: for customisation.
A drone frame is the skeleton that holds everything together: the arms carry the motors, the plates carry the flight controller, ESCs, battery and camera, and the whole structure must be stiff enough that vibration does not reach the gyro. Carbon fibre is the standard material because it is light and very rigid. The wheelbase, measured motor to motor across the diagonal, sets the size of propeller the frame can carry, and the arm thickness sets how well it survives crashes.
Match the frame to your parts. Check the motor mounting pattern, the flight controller and ESC stack hole spacing, the camera width, the video system you want to fly and the largest propeller the arms allow. TPU parts such as arm guards, antenna mounts and camera mounts are printed in a flexible plastic so they absorb impact. The battery strap and anti-slip pad keep the pack from moving under G-force.
Build carefully. Use thread-locking compound on the metal screws that are not in a plastic nut, keep the screw lengths from the hardware bag matched to the holes they belong in, and do not over-tighten screws into carbon fibre. Route motor wires away from sharp plate edges, mount the flight controller on soft grommets when the frame supports it, and check that nothing rubs a propeller before the first flight. After a crash, inspect the arms for cracks and replace any that are damaged.
Plan the balance of the build. A heavier battery moves the centre of gravity, so place it where the frame is designed to carry it, and keep the antenna, GPS and camera clear of the carbon plates where possible because carbon blocks radio signals.
Freestyle FPV
DIY racing builds
Digital FPV builds
5 inch quads
Learning to build
The page gives no wheelbase, weight or mounting sizes, so measure your parts against the maker's drawings before you buy.
The kit is supplied unassembled.
Size: 5 inch
Materials: carbon fiber, aluminum alloy, TPU
Supports: digital air units
Structure: shock-absorbing
Supply: unassembled kit
1 x SimpliFly MK5 Pro FPV digital drone frame kit
Builders who want a 5 inch frame for digital FPV builds.
5 inch.
Carbon fiber, aluminum alloy and TPU.
Yes, it supports modern digital air units.
No, it is an unassembled kit.
| Brand | SimpliFly |
|---|---|
| Arm Thickness | 5.000000 mm |
| Compatible Propeller Size | 5.000000 in |
| Material | carbon fiber, aluminum alloy, TPU |
| Weight | 130.000000 g |
| Selling unit | PCS |
