Standard checkout available. Verified maker dispatch.
The Seagull #MAP2 is a next-generation professional camera trigger and event logger, ideal for high-precision aerial mapping and 3D modelling. This combo includes a specialised angled Sony S2 (angled-S) cable for seamless integration with Sony cameras.
It captures exact photo coordinates at high rates, supports several triggering methods and provides internal data logging for efficient geotagging and accuracy.
The listing highlights logging of the exact camera exposure events at up to 25Hz, PWM, TTL and button trigger modes, microSD data logging and on-board IMU logging for extra precision.
Precision triggering and logging: a next-generation trigger and event logger.
Exact exposure events: logs the moment each picture is taken.
High logging rate: up to 25Hz.
Sony S2 cable: specialised angled-S camera cable included.
Multiple trigger modes: PWM, TTL and button.
Internal microSD logging: keeps data for geotagging.
On-board IMU logging: adds precision.
A camera trigger sits between the flight controller or receiver and the camera. It reads a standard RC PWM signal, the same kind of signal a servo receives, and converts it into the command the camera understands, such as a shutter release. A flight controller can then take pictures automatically at set distances or times, or you can trigger them from a spare transmitter switch.
For mapping and photogrammetry, knowing exactly when each picture was taken matters as much as taking it. Triggers that log the exposure time let the mapping software match each image with an exact position from the flight log, which improves the accuracy of the final map or 3D model.
Before a mapping flight, test the trigger on the ground: confirm that the camera fires reliably, that the memory card is fast enough and that the flight controller is set to the correct output and PWM values.
Aerial mapping and 3D modelling
Photogrammetry with Sony cameras
Precise geotagging of images
Surveying and inspection flights
Timed or distance-based photo capture
The listing gives a voltage of 3.5 to 5.5V, a weight of 1.6g (about 12g with cables), dimensions of 28.6 x 10.3 x 7.7mm and a maximum current draw of 21.75mA.
The combo includes the MAP2, two 30cm servo cables and a Sony S2 (angled-S) camera cable. Confirm your camera's multi-terminal connector matches the S2 cable.
Voltage: 3.5-5.5V
Weight: 1.6g (about 12g with cables)
Dimensions: 28.6 x 10.3 x 7.7mm
Current draw: 21.75mA max
Logging rate: up to 25Hz
Trigger modes: PWM, TTL, button
Storage: microSD
Extras: on-board IMU logging
1 x Seagull #MAP2
2 x servo cables (30cm)
1 x Sony S2 (angled-S) camera cable
Mapping and survey pilots who fly Sony cameras and need accurate exposure logging.
A Sony S2 (angled-S) cable.
Up to 25Hz.
By PWM, TTL or a button.
On a microSD card.
1.6g (about 12g with cables).
The MAP2, two 30cm servo cables and a Sony S2 cable.
| Brand | Seagull UAV |
|---|---|
| Current Consumption | 21.75 mA max |
| Dimensions | 28.6 x 10.3 x 7.7 mm |
| Input Voltage | 3.5-5.5V |
| Supported Protocols | PWM, TTL, Button |
| Weight | 1.600000 g |
| Selling unit | PCS |
