1 / 4Standard checkout available. Verified maker dispatch.
The Seagull #IR is a compact, 1-gram infrared camera trigger for UAVs. It provides remote shutter control for a wide range of cameras, including Sony, Nikon, Canon and Olympus.
It offers a simple, wireless and vibration-free solution for aerial photography, mapping and wildlife observation by converting standard R/C PWM signals into IR commands.
It supports picture (shutter release) and video record (Sony cameras only), works with most modern R/C radio systems and integrates with popular flight controllers such as Pixhawk, APM and DJI.
Infrared triggering: non-contact shutter activation.
Ultra-lightweight: 1 gram, about 4 grams with the servo cable.
Picture and video: shutter release, and video record on Sony cameras only.
Major brand support: Sony, Nikon, Canon and Olympus.
Standard PWM control: works with most R/C radios.
Flight controller friendly: Pixhawk, APM and DJI.
A camera trigger sits between the flight controller or receiver and the camera. It reads a standard RC PWM signal, the same kind of signal a servo receives, and converts it into the command the camera understands, such as a shutter release. A flight controller can then take pictures automatically at set distances or times, or you can trigger them from a spare transmitter switch.
For mapping and photogrammetry, knowing exactly when each picture was taken matters as much as taking it. Triggers that log the exposure time let the mapping software match each image with an exact position from the flight log, which improves the accuracy of the final map or 3D model.
Before a mapping flight, test the trigger on the ground: confirm that the camera fires reliably, that the memory card is fast enough and that the flight controller is set to the correct output and PWM values.
Aerial photography without a physical camera connection
Mapping and survey flights
Wildlife observation
Vibration-free hands-free shooting
Triggering from a spare transmitter channel
The listing gives a supply voltage of 3.5 to 5.5V (5V recommended; do not exceed 5.5V), a maximum current draw of 22.5mA and an input of a standard PWM servo signal from 1000 to 2000 microseconds. The dimensions are 23.5 x 9.8 x 4.4mm.
An infrared trigger works only when the camera's IR receiver can see the trigger's LED, so place it within line of sight of the receiver and out of bright sunlight if possible.
Voltage: 3.5-5.5V (5V recommended; do not exceed 5.5V)
Current draw: 22.5mA max
Input signal: standard R/C PWM servo signal (1000-2000us)
Dimensions: 23.5 x 9.8 x 4.4mm
Weight: 1g (about 4g with servo cable)
1 x Seagull #IR camera trigger
1 x servo cable (30cm)
UAV photographers and mappers who want an ultra-light, contactless shutter trigger for IR-capable cameras.
Sony, Nikon, Canon and Olympus.
Yes, video record is supported on Sony cameras only.
A standard R/C PWM servo signal of 1000 to 2000us.
3.5 to 5.5V, with 5V recommended.
1g, about 4g with the servo cable.
The trigger and a 30cm servo cable.
| Brand | Seagull UAV |
|---|---|
| Current Consumption | 22.5 mA max |
| Dimensions | 23.5 x 9.8 x 4.4 mm |
| Input Voltage | 3.5-5.5V |
| Supported Protocols | IR (PWM input) |
| Weight | 1.000000 g |
| Selling unit | PCS |
