1 / 3Standard checkout available. Verified maker dispatch.
The SafeConnect XT60 male with 14AWG silicone wire, 10cm, is useful when connecting your battery and ESC. It is a widely used LiPo battery connector and makes the connection between the battery and motor system easier.
The heavy-duty cable suits projects with bigger motors and controllers. The XT60 male connects to an XT60 female connector, and the connectors are made from high-temperature nylon with gold-plated spring pins or sockets moulded in.
The shape of the XT60 prevents reverse polarity, and once plugged in the connection is very solid. The listing says it is suitable for high-power brushless and brushed ESCs and motors used in RC helicopters, quadcopters, planes and cars.
High-quality connector: built for heavy-duty use and a long life.
Silicone wire, 14AWG, 10cm: flexible pre-attached lead.
Compatible with XT60 female: plugs straight into standard XT60 sockets.
Anti-reverse shape: the shape prevents reverse polarity.
For high-power applications: for brushless and brushed ESCs and motors.
A power connector is the link between your battery and everything that draws current from it. It has to hold securely, carry the current without heating up and, ideally, only fit together one way so that reverse polarity is impossible. The metal contacts are usually gold plated to resist corrosion, and the housing holds the two contacts apart and keeps them aligned.
Solder connectors with a clean, hot joint and enough solder to fill the cup, then slide heat-shrink over the joint so no bare metal is exposed. A cold or under-heated joint has high resistance and gets hot under load, which is the most common cause of connector failure. Always check polarity before you plug in a battery for the first time.
Choose connectors by the current they will actually carry, not just by how they look. A connector that is too small runs hot and can melt its housing, while a connector that is rated well above your load stays cool and lasts longer. Inspect connectors periodically, and replace any that show discolouration, loose contacts or cracked housings.
Battery leads for quadcopters and RC planes
ESC power leads
RC helicopters and cars
Charger leads
Building or repairing battery harnesses
The lead has a 10cm length of 14AWG silicone wire soldered to a male XT60. Check that your battery or ESC has a matching XT60 female connector.
The connector body is high-temp nylon and the metal is brass with gold-plated finish.
Connector type: XT60 male
Connector material: high-temp nylon
Length: 10cm
Cable thickness: 14AWG
Metal: brass
1 x SafeConnect XT60 male connector with 14AWG silicone wire, 10cm
RC and drone builders who need a ready-made XT60 male pigtail for battery or ESC wiring.
10cm.
14AWG silicone.
Male XT60.
High-temperature nylon.
The XT60 shape prevents reverse polarity.
One SafeConnect XT60 male connector with wire.
| Brand | SafeConnect |
|---|---|
| Cable Gauge | 14AWG |
| Cable Length | 10 cm cm |
| Connector | XT60 Male |
| Connector Type | XT60 male |
| Material | High-temp nylon, brass contacts |
| Selling unit | PCS |
