1 / 3Sold out · Ask us about restocking
Not available to order right now.
The Readytosky 1200TVL HD FPV camera with a 2.8mm lens is designed for FPV enthusiasts who want detailed video. The listing says advanced image sensor technology gives good performance even in low light, and a compact design fits easily into any FPV drone or quadcopter setup.
Wide dynamic range (WDR) and digital noise reduction (DNR) are listed for a smooth, reliable picture, whether you fly in bright daylight or at night.
The camera weighs 12g and measures 26 x 26 x 30mm, and it runs from a 12V supply.
1200TVL with 2.8mm lens: sharp, detailed video.
Low light sensitivity: 0.01 lux at F1.2.
D-WDR and 2DNR: better contrast and lower noise.
AGC and backlight compensation: adjust automatically to changing light.
Light and compact: 12g and 26 x 26 x 30mm.
PAL: signal system for PAL goggles.
An analog FPV camera sends a live composite video signal to the video transmitter on the drone. The image sensor turns light into an electrical signal, the camera processes it and outputs a video signal that the transmitter sends to your goggles. TVL (television lines) is a measure of horizontal resolution, and a bigger sensor usually collects more light, which helps in dim conditions.
The lens sets the field of view: a wider angle shows more of the scene and exaggerates the sense of speed, while a narrower angle shows a more natural picture. Features such as WDR (wide dynamic range) balance very bright and dark areas, DNR reduces noise and auto gain control adjusts the picture as the light changes. Low latency matters, because delay between what the camera sees and what you see makes flying harder.
Set the video standard (PAL or NTSC) to match your goggles, power the camera within its rated voltage range and mount it firmly so vibration does not blur the image. Tilt the camera up for fast, forward-pitched flying. Keep the lens clean and use a lens protector or ND filter where suitable.
FPV drones and quadcopters with a 12V camera supply
Day and night flying
Replacing a camera in a larger quad
Fixed-wing FPV
Racing and freestyle builds
The technical specifications list a 1/4 CMOS Super HAD II or 1/3 CMOS Super HAD II sensor, horizontal resolution of 700TVL or 1200TVL, a 2.8mm lens, a PAL signal system, an S/N ratio above 60dB (AGC off), an electronic shutter of 1/50 to 1/100,000, AGC and BLC, a minimum illumination of 0.01 lux at F1.2, D-WDR, 2DNR, auto/colour/black-and-white day/night, a DC 12V supply, a weight of 12g and dimensions of 26 x 26 x 30mm.
The page does not list a package contents section.
Brand: ReadytoSky
Sensor: 1/4 CMOS Super HAD II / 1/3 CMOS Super HAD II
Resolution: 700TVL/1200TVL
Lens: 2.8mm
Signal: PAL
S/N ratio: over 60dB (AGC off)
Min illumination: 0.01 lux / F1.2
WDR: D-WDR; DNR: 2DNR
Power: DC 12V
Weight: 12g
Size: 26 x 26 x 30mm
1 x Readytosky 1200TVL HD CMOS FPV camera, 2.8mm lens, PAL
Builders who need a straightforward 12V PAL FPV camera with 1200TVL resolution.
1200TVL.
2.8mm.
DC 12V.
12g.
PAL.
D-WDR and 2DNR.
| Brand | Readytosky |
|---|---|
| Dimensions | 26 x 26 x 30 mm |
| Display Resolution | 1200TVL |
| Operating Voltage | DC 12V |
| Sensor | 1/4 or 1/3 CMOS Super HAD II |
| Weight | 12.000000 g |
| Selling unit | PCS |
