RC832S 5.8GHz 32-Channel FPV Video Receiver with Dual AV Output

The RC832S is the receiving half of a classic analogue FPV link, and it earns its place by being unfussy. Thirty-two channels across four frequency bands are selected with two buttons and read off a two-digit display, and the receiver remembers where it was left when power is cut, so a field session does not begin by hunting for the channel again.

Two independent AV outputs are the practical detail. One can drive a monitor while the other feeds a recorder or a second screen, which is what makes this suitable for a ground station shared between a pilot and a spotter. Receiving sensitivity is quoted at -95dBm, and it handles PAL, NTSC and SECAM video with 6.5MHz audio.

Power is deliberately flexible at 7-26V DC drawing around 130mA, so it runs from a 3S pack through the supplied pre-wired JST lead rather than needing a dedicated supply. At 78 x 50 x 15mm with a removable RP-SMA antenna, it packs into a case easily and accepts a better antenna when range starts to matter.