Sold out · Ask us about restocking
Not available to order right now.
The Radxa Display 8 HD is an 8 inch LCD touchscreen module with 800 x 1280 resolution, capacitive multi-touch, g-sensor auto rotation and a single-cable interface. It is designed to work with Radxa single-board computers through the MIPI DSI connector.
It has a white LED backlight, an anti-glare coating and 300 cd/m2 brightness, and shows 16.7 million colours.
The active area is 107.64 x 172.224 mm and the whole module measures 127.00 x 199.22 x 5.9 mm. The touch controller supports five points, and the connector is a 40-pin 0.5 mm pitch MIPI DSI connector. The module includes a gravity sensor for rotation and operates from -10 to 60 C. It has no shell.
The package includes the display, a 15-pin to 40-pin FPC cable, two 39-pin to 40-pin FPC cables, ten M3 copper pillars, ten DuPont wires and ten M3 x 6 screws. Check that your board has a compatible MIPI DSI connector and that the cable matches, since DSI pinouts differ between boards.
Radxa users building touch interfaces, kiosks, control panels and compact tablets, especially where a portrait screen is useful.
Check your board's documentation for the correct MIPI DSI port and the right FPC cable before you connect anything, because DSI connectors and pinouts differ between boards. Power the board off while you plug the cable in, then enable the display in the operating system's settings. Use the screen's rotation to match your enclosure.
800 x 1280 pixels.
Five, using capacitive touch.
A 40-pin 0.5 mm MIPI DSI connector.
Yes, using a built-in gravity sensor.
The display, FPC cables, copper pillars, DuPont wires and screws.
| Brand | Radxa |
|---|---|
| Dimensions | 127.00 x 199.22 x 5.9 mm |
| Display Resolution | 800x1280 |
| Operating Temperature | -10 to 60 C |
| Screen Size | 8.0 inch |
| Touch Screen | Capacitive |
| Selling unit | PCS |
