1 / 2Standard checkout available. Verified maker dispatch.
The Radiolink RC8X is an 8-channel, 2.4 GHz transmitter and receiver set aimed at RC cars, crawlers, drift cars, boats and robots. Its standout feature is a built-in 4.3 inch touch screen that shows telemetry and model settings in real time.
It stores 200 model memories, so you can keep separate setups for many vehicles, and it shows voltage telemetry for accurate battery monitoring.
The set is equipped with R8FG and R4FGM V2.1 gyro receivers for precise control, which makes it especially popular for drift and racing cars where stability matters. Use the gyro receiver in a location that is flat and firmly mounted, and adjust gyro gain gradually.
Bind each receiver to a model memory, set failsafe and end points, and check steering and throttle direction with the wheels off the ground before you drive. Because the RC8X is a premium radio, look after the screen with a protector and store it in a padded case.
Enthusiasts who run RC cars and crawlers and want a modern touch-screen radio with gyro receivers and telemetry in one set.
Calibrate the steering and throttle so that the neutral point and end points match your servo and ESC, and check the direction of each channel with the wheels off the ground. Use the gyro receiver's gain gradually, starting low, and set a failsafe so the car stops if the link drops. Keep a screen protector on the touch screen and store the radio in a padded case.
Eight.
4.3 inches, with touch control.
200.
The R8FG and R4FGM V2.1 gyro receivers.
Yes, through voltage telemetry.
| Brand | Radiolink |
|---|---|
| Channels | 8.000000 |
| Frequency | 2.4GHz |
| Protocol | R8FG and R4FGM V2.1 gyro receiver |
| Selling unit | PCS |
