1 / 3Sold out · Ask us about restocking
Not available to order right now.
The Radiolink M10N SE100 is a high-specification, compact GPS and compass module built around a u-blox UBX-M10050 (M10) 72-channel GNSS decoder chip, a Honeywell HMC5983 magnetometer, an Infineon BGA715L7 power amplifier IC and a Murata surface acoustic wave dual filter.
The listing states that this component selection delivers 50cm concurrent GNSS positioning accuracy and a 6-second, 20-satellite acquisition in open-ground conditions.
It receives GPS, QZSS L1 C/A, GLONASS L1OF, BeiDou B1 and SBAS L1 C/A concurrently, and a 2.5 dBi high-gain selective ceramic antenna helps the module hold its lock.
72-channel u-blox M10 decoder: multi-constellation concurrent GNSS reception.
50cm accuracy: in open-field and valley station-keeping conditions.
Fast acquisition: 20 satellites in 6 seconds in open ground.
Honeywell HMC5983 magnetometer: an accurate heading reference.
Infineon MMIC and Murata SAW dual filter: front-end amplification and interference rejection.
2.5 dBi ceramic antenna: high-gain and selective.
6P MX interface: pin-compatible with Pixhawk 2.4.8.
A GPS module listens to signals from navigation satellites and works out its position, speed and time. A flight controller or microcontroller uses that position for modes such as position hold, waypoint missions and return-to-home, or simply for logging where something has been. Supporting several satellite constellations means more satellites in view, which usually gives a faster and more reliable fix.
Mount the module as far as practical from motors, power wires and video transmitters, with a clear view of the sky, and let it get a full satellite lock before you rely on it. Poor mounting and interference are more common causes of GPS problems than the module itself. Keep the antenna face pointing up and secure the module so vibration does not shift it.
A first fix can take longer than later ones, particularly indoors or after the module has been off for a long time. A module with a backup battery or stored configuration can start faster the next time, but you should always wait for a solid lock outdoors before the first flight of the day.
Pixhawk 2.4.8, PX4 and APM flight controller builds
Autonomous missions and return-to-home
Multirotor and fixed-wing navigation
Open-field and valley station-keeping
Replacing an older GPS/compass unit
The module has a 6P MX interface connector that is listed as pin-compatible with the Pixhawk 2.4.8. It is sold for APM, PX4 and Pixhawk 2.4.8 flight controllers.
The form factor is 47.98 x 40.64 x 14.99mm. A metal rod bracket, connecting cable, two metal fixing gaskets and a foam fixing sticker are included for mounting.
GNSS chip: u-blox UBX-M10050 (M10), 72 channels
Systems: GPS, QZSS L1 C/A, GLONASS L1OF, BeiDou B1, SBAS L1 C/A
Accuracy: 50cm concurrent GNSS (open field)
Acquisition: 20 satellites in 6 seconds
Magnetometer: Honeywell HMC5983
Antenna: 2.5 dBi ceramic
Connector: 6P MX
Size: 47.98 x 40.64 x 14.99mm
1 x M10N SE100 GPS
1 x metal rod bracket
1 x connecting cable
2 x metal fixing gasket
1 x foam fixed sticker
Pixhawk, PX4 and APM builders who want a compact high-spec GPS and compass unit with a mounting bracket.
APM, PX4 and Pixhawk 2.4.8.
50cm concurrent GNSS positioning in open-field conditions.
20 satellites in 6 seconds in open ground.
Honeywell HMC5983.
A 6P MX connector, pin-compatible with Pixhawk 2.4.8.
The GPS, a metal rod bracket, a cable, two metal gaskets and a foam sticker.
| Brand | Radiolink |
|---|---|
| Antenna Type | 2.5 dBi ceramic |
| Compass | Honeywell HMC5983 |
| Compatible Flight Controllers | Pixhawk 2.4.8, PX4, APM |
| Connector | 6P MX (Pixhawk 2.4.8 compatible) |
| Dimensions | 47.98 x 40.64 x 14.99 mm |
| GNSS Chipset | u-blox UBX-M10050 (M10), 72 channels |
| GNSS Constellations | GPS, GLONASS, BeiDou |
| Selling unit | PCS |
