1 / 4Sold out · Ask us about restocking
Not available to order right now.
The Radiolink DiViT adapter board is a versatile, cost-effective way to integrate digital FPV video transmission boards with flight controllers. It is engineered for CrossFlight, Mini Pix, Pixhawk and compatible controllers and gives reliable connections to DJI FPV, the O3 Air Unit and Walksnail HD systems.
The adapter streamlines wiring and reduces assembly complexity while keeping a compact, lightweight design that adds minimal weight to a drone build.
According to the listing, it works with the DJI digital FPV system, the DJI O3 Air Unit and the Caddx Walksnail HD system.
Cost-effective: reduces the overall assembly cost of your drone.
Wide compatibility: works with CrossFlight, Mini Pix, Pixhawk and other open-source controllers.
Multiple FPV systems: DJI FPV, O3 Air Unit and Walksnail HD.
Simplified setup: streamlines wiring for quick installation.
Lightweight: 1g, or 5g with wire.
Reliable video transmission: stable, high-quality digital video output.
Digital FPV air units need power and connections to the flight controller for OSD data and control. On an open-source flight controller such as a Pixhawk, those connections go to several different ports, and building a harness for them by hand is fiddly. An adapter board collects them on one small board so that the harness is neat and repeatable.
When you set up the system, connect the air unit through the correct RC IN and TELEM ports and set the flight controller's serial port parameters to match the protocol the video system uses. Check the wiring against the manual, because a wrong connection can damage an air unit.
Keep the adapter away from the video transmitter's antenna and power wiring, and secure the cables with ties so vibration does not loosen the connectors.
Pixhawk-based builds with DJI FPV or O3 Air Unit
Walksnail HD installations on Mini Pix or CrossFlight
Simplified wiring for digital video
Lightweight custom drone harnesses
Builds that need a cost-effective adapter
The listing gives compatible flight controllers as Mini Pix, CrossFlight, Radiolink Pixhawk and open-source Pixhawk, and compatible systems as the DJI digital FPV system, the DJI O3 Air Unit and the Caddx Walksnail HD system. The size is 22.6 x 12.7 x 5.5mm.
The package contains the adapter, two RC IN port cables, two TELEM port cables and a DiViT and power module connect cable.
Compatible controllers: Mini Pix, CrossFlight, Radiolink Pixhawk, open-source Pixhawk
Compatible systems: DJI Digital FPV, DJI O3 Air Unit, Caddx Walksnail HD
Dimensions: 22.6 x 12.7 x 5.5mm
Weight: 1g (5g with wire)
1 x Radiolink DiViT digital video transmission adapter
2 x RC IN port connection cable
2 x TELEM port connection cable
1 x DiViT and power module connect cable
Builders who fly digital FPV on Radiolink or open-source Pixhawk controllers and want a tidy adapter.
DJI Digital FPV, the DJI O3 Air Unit and Caddx Walksnail HD.
Mini Pix, CrossFlight, Radiolink Pixhawk and open-source Pixhawk.
1g, about 5g with wire.
22.6 x 12.7 x 5.5mm.
Two RC IN, two TELEM and one DiViT and power module cable.
It streamlines wiring and reduces assembly complexity.
| Brand | Radiolink |
|---|---|
| Compatible Systems | DJI Digital FPV, DJI O3 Air Unit, Caddx Walksnail HD |
| Dimensions | 22.6 x 12.7 x 5.5 mm |
| Software Compatibility | Mini Pix, CrossFlight, Radiolink Pixhawk, open-source Pixhawk |
| Weight | 5.000000 g |
| Selling unit | PCS |
