1 / 4Sold out · Ask us about restocking
Not available to order right now.
The plastic landing gear for drones adds extra protection to your flying platform and to the equipment you carry. The listing says this protection costs very little compared with the accessories you mount on a multirotor.
It provides around 150mm of ground clearance, which the listing says is more than enough to mount a large item such as a gimbal or battery under the aircraft. The legs keep the centre unobstructed for cameras, gimbals and batteries, and protect them.
It is made from high-quality ABS plastic and is easy to install. The listing says these crab legs reduce the impact of hard and rough landings.
Good-quality landing gear: ABS plastic legs.
Ground clearance: about 150mm for a gimbal or battery.
Skid-proof feet: help the aircraft stay put on landing.
Compatible with large frames: Q450, S500 and similar frames.
Easy installation: simple to fit to the frame.
Protects the payload: keeps the centre free for cameras and batteries.
Landing gear lifts the frame off the ground so that the battery, camera or gimbal underneath does not hit the ground on take-off and landing. It also spreads the shock of a hard landing across four legs and gives the drone a stable base so it does not tip over on uneven ground.
For a gimbal, clearance is critical: the lens and the moving parts need enough room to tilt fully without touching the ground. Check the height with the gimbal at its lowest angle, and make sure the legs are all fitted at the same angle so the drone sits level.
A tidy, well-built airframe flies better and lasts longer. Check every screw after the first few flights, use thread-locking compound on metal fasteners, keep wires away from moving parts and inspect the frame and accessories for cracks after any crash. Small parts like these are cheap compared with the electronics they protect, so replace them as soon as they wear out.
SK480, F450 and F550 quadcopter and hexacopter frames
Aircraft that carry a gimbal or camera underneath
Battery-under-frame layouts
Reducing the impact of hard landings
Replacing broken landing legs
The specification list gives ABS plastic in black with a ground clearance of 150mm. A feature line on the same page says 200mm of ground clearance, so use 150mm as the safe figure and measure your own build.
It is listed as compatible with the Q450, S500 and other large frames. The package contains one plastic landing gear set.
Material: ABS plastic
Colour: black
Ground clearance: 150mm (200mm quoted in one feature line)
Fits: SK480, F450, F550, Q450, S500 and other large frames
1 x plastic landing gear for drones (SK480 / F450 / F550 frames)
F450 and F550-class multirotor builders who need landing gear with room for a gimbal or battery.
SK480, F450, F550, Q450, S500 and other large frames.
About 150mm.
ABS plastic.
Black.
Yes, the listing calls it skid-proof.
The listing says it is very easy to install.
| Brand | Generic |
|---|---|
| Color | Black |
| Compatible Drone | SK480, F450, F550, Q450, S500 |
| Ground Clearance | 150.000000 mm |
| Material | ABS plastic |
| Selling unit | PCS |
