1 / 2Sold out · Ask us about restocking
Not available to order right now.
The original Tattu 16000mAh 15C 22.2V 6S1P XT90-S LiPo battery is specially designed for high power output in quadcopters, airplanes, RC boats and RC cars.
It has heavy-duty discharge leads for high current loads, balanced charging support and overcharge and over-discharge protection.
The listing gives a 15C continuous and 50C burst rating and about 1700g weight. The source page showed this item as sold out when it was read.
16000mAh 6S1P: large capacity.
22.2V: six cells.
15C / 50C: continuous and burst.
XT90-S: anti-spark connector.
Protection: overcharge and over-discharge protection.
Heavy-duty leads: for high current.
A LiPo (lithium polymer) drone battery stores energy in cells connected in series. The S number is the cell count, and each cell has a nominal voltage of 3.7V, so a 6S pack is 22.2V. Capacity in mAh tells you how much energy the pack holds, and the C rating tells you how much current it can deliver: multiply the C rating by the capacity in amp-hours to get the continuous current.
Match the pack to your aircraft. The voltage must suit your ESCs and motors, the connector must match your power system and the pack must be able to deliver the current that the propulsion system draws at full throttle. A pack that is asked for more current than its rating will heat up and lose life.
Handle LiPo batteries with care. Charge them with a balance charger set to the correct cell count and current, never leave them charging unattended, store them at a partial charge, never use a swollen or damaged pack and transport large packs in a fire-resistant container. Large packs also weigh a lot, so lift and mount them securely.
Log how each pack behaves over time. Note the resting voltage after a flight, how warm the pack is and how much capacity the charger puts back in. A pack that heats up more than usual, sags sooner or shows one cell drifting away from the others is telling you that it is ageing, and it should be retired before it fails in the air. Label your packs so you can rotate them evenly.
Drones and multirotors
RC aircraft, cars and boats
Robotics and DIY projects
Replacing a matching pack
Field and workshop use
The specification list gives 16000mAh, 6S1P, 22.2V and a discharge rating of 15C with a burst of 50C. Connector: XT90-S with JST-XH balance plug.
Check that your charger, ESC and connector suit this pack before you buy, and that the dimensions and weight suit your airframe.
Capacity: 16000mAh
Cells: 6S1P
Voltage: 22.2V
Discharge rate: 15C (burst 50C)
Configuration: 6S1P
Dimensions: about 170 x 76 x 63mm
Weight: about 1700g
Connector: XT90-S with JST-XH balance plug
Dimensions: about 170 x 76 x 63mm
Weight: 1700g
Original Tattu 16000mAh 15C 22.2V 6S1P XT90-S LiPo battery
Pilots and builders who need a 16000mAh 6S1P pack for their drone or RC model.
16000mAh.
22.2V (6S1P).
15C, burst 50C.
XT90-S with JST-XH balance plug.
Yes, it is a rechargeable lithium polymer pack.
Original Tattu 16000mAh 15C 22.2V 6S1P XT90-S LiPo battery
| Brand | Tattu |
|---|---|
| Balance Plug | JST-XH |
| Capacity | 16000.000000 mAh |
| Cell Configuration | 6S1P |
| Dimensions | about 170 x 76 x 63mm |
| Discharge Plug | XT90-S |
| Discharge Rate | 15C continuous / 50C burst |
| Nominal Voltage | 22.2V |
| Weight | 1700.000000 g |
| Selling unit | PCS |
