1 / 4Sold out · Ask us about restocking
Not available to order right now.
This Orange 3300mAh 3S battery is described as a low-cost, high-power-density lithium polymer battery with great reliability, made for DIY drones, quadcopters, RC cars and similar uses.
The specification list gives 11.1V, 3300mAh, 35C continuous and 80C burst discharge, a JST-XH balance plug, an XT-60 discharge plug, dimensions of 140 x 43 x 20mm and a weight of 260g.
A user manual is available for download from the seller. The source page showed this item as sold out when it was read.
11.1V 3S: three cells.
3300mAh: a good size for small quads.
35C / 80C: continuous and burst.
XT-60 and JST-XH: common plugs.
Low cost: high power density.
Light: 260g.
A LiPo (lithium polymer) drone battery stores energy in cells connected in series. The S number is the cell count, and each cell has a nominal voltage of 3.7V, so a 6S pack is 22.2V. Capacity in mAh tells you how much energy the pack holds, and the C rating tells you how much current it can deliver: multiply the C rating by the capacity in amp-hours to get the continuous current.
Match the pack to your aircraft. The voltage must suit your ESCs and motors, the connector must match your power system and the pack must be able to deliver the current that the propulsion system draws at full throttle. A pack that is asked for more current than its rating will heat up and lose life.
Handle LiPo batteries with care. Charge them with a balance charger set to the correct cell count and current, never leave them charging unattended, store them at a partial charge, never use a swollen or damaged pack and transport large packs in a fire-resistant container. Large packs also weigh a lot, so lift and mount them securely.
Log how each pack behaves over time. Note the resting voltage after a flight, how warm the pack is and how much capacity the charger puts back in. A pack that heats up more than usual, sags sooner or shows one cell drifting away from the others is telling you that it is ageing, and it should be retired before it fails in the air. Label your packs so you can rotate them evenly.
Drones and multirotors
RC aircraft, cars and boats
Robotics and DIY projects
Replacing a matching pack
Field and workshop use
The specification list gives 3300mAh, 3S, 11.1V and a discharge rating of 35C with a burst of 80C. Connector: XT-60 discharge plug, JST-XH balance plug.
Check that your charger, ESC and connector suit this pack before you buy, and that the dimensions and weight suit your airframe.
Capacity: 3300mAh
Cells: 3S
Voltage: 11.1V
Discharge rate: 35C (burst 80C)
Configuration: 3S
Connector: XT-60 discharge plug, JST-XH balance plug
Dimensions: 140mm x 43mm x 20mm
Weight: 260g
Orange 11.1V 3300mAh 3S 35C-80C lithium polymer battery
Pilots and builders who need a 3300mAh 3S pack for their drone or RC model.
3300mAh.
11.1V (3S).
35C, burst 80C.
XT-60 discharge plug, JST-XH balance plug.
Yes, it is a rechargeable lithium polymer pack.
Orange 11.1V 3300mAh 3S 35C-80C lithium polymer battery
| Brand | Orange |
|---|---|
| Balance Plug | JST-XH |
| Capacity | 3300.000000 mAh |
| Cell Configuration | 3S |
| Dimensions | 140mm x 43mm x 20mm |
| Discharge Plug | XT-60 |
| Discharge Rate | 35C continuous / 80C burst |
| Nominal Voltage | 11.1V |
| Weight | 260.000000 g |
| Selling unit | PCS |
