1 / 4Standard checkout available. Verified maker dispatch.
This aluminium alloy motor mounting stand is engineered for high performance and reliability. Its adjustable height lets it work with a wide range of motors, which makes it an essential accessory for RC drones and model airplanes.
The listing describes precision manufacturing and a lightweight design that give durability and portability and improve the performance of the motor set-up.
The height is adjustable from 50mm to 110mm (2 to 4.3 inches), and the stand suits motors such as the 2814, 3536, 4250 and 4258 with mounting hole pitches of 25mm and 30mm.
Premium aluminium alloy: longevity and sturdiness.
Lightweight and portable: easy to carry without adding weight to your model.
Adjustable height: from 50mm to 110mm (2 to 4.3 inches).
Versatile compatibility: 2814, 3536, 4250, 4258 and more, with 25mm and 30mm pitches.
Professional manufacturing: stable performance and reliability.
A motor mount holds the motor to the airframe and carries the thrust and torque that the propeller produces. It has to be stiff and accurately aligned: any flex or slop turns into vibration, which is bad for the motor bearings, the propeller and any electronics on the aircraft. Mounts are made from plastic, aluminium or carbon fibre, and the choice is a balance between weight, stiffness and cost.
Before you fit a motor, check that the mounting hole pattern of the motor matches the mount, that the screws are the right length so that they do not touch the motor windings and that the shaft is aligned with the direction of thrust. Use thread-locking compound on metal screws and tighten them evenly.
After mounting, spin the motor by hand to feel for any rubbing and run it at low throttle with the propeller removed to listen for odd noises. Inspect the mount regularly for cracks, particularly after crashes.
Mounting motors on RC airplanes
Drone and multirotor motor mounting
Adjustable-height motor supports
Motor bench and test set-ups
Fitting 2814, 3536, 4250 and 4258 motors
The listing states an adjustable height of 50mm to 110mm (2 to 4.3 inches) and mounting hole pitches of 25mm and 30mm. The material is aluminium alloy.
Check the hole pattern of your motor before ordering, and use screws that do not reach into the motor windings. The page does not list a package contents section.
Material: aluminium alloy
Height: adjustable, 50-110mm (2-4.3in)
Mounting hole pitch: 25mm and 30mm
Suitable motors: 2814, 3536, 4250, 4258 and similar
Use: RC drones and model airplanes
1 x adjustable aluminium motor mounting stand
RC airplane and drone builders who want an adjustable, lightweight aluminium stand for their motors.
50mm to 110mm (2 to 4.3 inches).
Aluminium alloy.
2814, 3536, 4250, 4258 and similar motors.
25mm and 30mm.
No, it is lightweight and portable.
RC drones and model airplanes.
| Brand | Generic |
|---|---|
| Height Range | 50-110 mm (2-4.3 in) |
| Material | Aluminum alloy |
| Mounting Hole Pitch | 25 mm and 30 mm |
| Selling unit | PCS |
