Mixed Resistor Value Pack, 1 Watt, Carbon Film, 26 Values

This resistor pack bundles two pieces each of 26 common resistance values, all at a 1 watt power rating, considerably more robust than the 1/4 watt resistors found in most basic hobby assortments. That higher wattage rating matters for circuits dissipating more power through the resistor than typical low-current signal work, such as current-limiting resistors on higher-power LEDs, bleeder resistors in power supplies, or load resistors in testing circuits, where a 1/4 watt part would overheat or fail.

Values span from 10 ohms up through 560K ohms, covering 10, 15, 22, 33, 47, 68, 100, 220, 390, 560, 1K, 1K5, 2K2, 3K3, 4K7, 5K6, 6K8, 9K1, 18K, 22K, 33K, 56K, 75K, 100K, 150K and 180 ohms, with 2 pieces of each value included, a genuinely wide spread that covers most common voltage-divider, current-limiting, and pull-up/pull-down applications a hobbyist or technician is likely to encounter, now at a power rating suited to slightly heavier-duty circuits than a basic 1/4 watt kit would handle.

Construction is carbon film with standard leaded axial leads, working equally well pushed into a breadboard for prototyping, soldered onto perfboard for a more permanent build, or fitted directly to a custom PCB. Having a genuine spread of 1 watt values on hand means a project pulling more current through a resistor than signal-level work typically draws doesn't need a special one-off order for a single higher-wattage part.

Hobbyists, technicians, and repair professionals who occasionally need a higher-wattage resistor than the common 1/4 watt assortment provides, without wanting to order each value individually, will find this mixed 1 watt pack a practical addition to a parts drawer alongside a standard low-power resistor kit.