1 / 5Sold out · Ask us about restocking
Not available to order right now.
The Mauch Sensor Hub X2 simplifies connecting several Mauch sensors to your flight controller. With DF-13 connectors, it allows two current and voltage sensors (for example the PL-xxx and HS-xxx models) to be integrated for full power monitoring and redundant data paths.
It centralises the sensor data and provides one output to the flight controller, which the listing says ensures robust communication and improves overall system reliability.
The listing describes the hub as compact, lightweight, easy to install and configure and essential for advanced power monitoring.
Two sensor inputs: connects two Mauch current/voltage sensors.
Redundant data paths: telemetry from two sensors.
DF-13 connectors: reliable, familiar connections.
Simplified wiring: one output to the flight controller.
Centralised sensor data: robust communication with the flight controller.
Compact and lightweight: 39 x 31 x 6mm and 7g.
In a large aircraft, one power sensor may not be enough. Two battery packs, or a system that needs a backup measurement, require two sensors, but a flight controller usually has one power-monitor port. A hub collects the signals from both sensors onto one output cable so that the flight controller can read them.
A passive hub like this one has no active electronics, so it simply routes the signals. Check the connector pinouts in the manual, use the correct sensor boards and set up the flight controller's battery monitors to match the sensors you connect.
For accurate readings, set the voltage divider and amps-per-volt values in the flight controller's battery monitor to match the board, and check the reported voltage and current against a multimeter and a known load. A wrong scale factor can make a battery look fuller than it is. Solder the heavy-gauge wires carefully and protect the joints with heat-shrink.
Dual-battery or redundant power monitoring
Heavy-lift and industrial UAVs
Mauch PL and HS sensor systems
Cleaner wiring for complex power setups
Pixhawk power-monitor connections
The specification list gives two sensor input ports and one output port to the flight controller (DF-13), DF-13 connectors, dimensions of 39 x 31 x 6mm, a weight of 7g without cables and a typically passive operating voltage.
The package includes the Sensor Hub X2, two current sensor board options and a 2-6S BEC or 4-16S HYB-BEC. This product page showed the item as out of stock when it was read, so check availability before ordering.
Model: Mauch 080 Sensor Hub X2
Inputs: 2 x sensor inputs
Output: 1 x flight controller output (DF-13)
Connectors: DF-13
Dimensions: 39 x 31 x 6mm
Weight: 7g without cables
Operating voltage: typically passive
1 x Sensor Hub X2
2 x current sensor board options
1 x 2-6S BEC or 4-16S HYB-BEC
Builders of professional UAVs who monitor two battery or sensor lines.
It connects two Mauch current and voltage sensors to one flight controller output.
DF-13.
39 x 31 x 6mm.
7g without cables.
The listing says it is typically passive.
The hub, two current sensor board options and a BEC option.
| Brand | Mauch |
|---|---|
| Connector | DF-13 |
| Dimensions | 39 x 31 x 6 mm |
| Ports | 2 sensor inputs, 1 flight controller output |
| Weight | 7.000000 g |
| Selling unit | PCS |
