1 / 3Sold out · Ask us about restocking
Not available to order right now.
The Mauch PL-025 HYB-BEC is a high-performance, multi-output power module for demanding drone applications. It provides ultra-clean and stable power from 4S to 14S LiPo batteries and offers two 5.3V outputs, one 5.0V output and one 12.0V output.
The listing says it is ideal for complex industrial UAVs that need precise and reliable power distribution to several critical components.
It is a hybrid BEC, with high efficiency and low-noise operation, and it has overcurrent and short-circuit protection.
Four independent regulated outputs: two 5.3V, one 5.0V and one 12.0V.
Wide input: 4S to 14S LiPo.
Hybrid BEC: ultra-clean power.
Two dedicated 5.3V outputs: for flight controllers.
One 5.0V and one 12.0V output: for peripherals.
High efficiency and low noise: improves system reliability.
Complete cable set: sensor, backup and output cables included.
A BEC or UBEC (battery eliminator circuit) converts the high voltage of a flight battery to a lower, steady voltage for receivers, servos, flight controllers and other electronics. A switching regulator does this efficiently and gives off little heat, which is why it is preferred over a simple linear regulator when the input voltage is high.
When you choose a BEC, check that its input range covers your battery, that the output voltage suits your devices and that its continuous current rating is comfortably above what they draw. Servos and video transmitters can draw short bursts, so leave some headroom.
A clean supply also matters for radio equipment: a regulator with low ripple and low radio-frequency noise is less likely to interfere with a receiver or video link. Mount it away from antennas and keep the input and output wires short and twisted where you can.
Complex industrial UAVs with several supply rails
Redundant flight controller power
Powering 5V and 12V peripherals
High-voltage battery systems
Pixhawk 2.1 backup power wiring
The specification list gives an input of 4S to 14S LiPo (about 14.8V to 58.8V), outputs of 5.3V, 5.3V, 5.0V and 12.0V, dimensions of 59 x 87 x 13mm and a weight of 72g with the enclosure (without cables). Protection features are overcurrent and short-circuit protection.
The package includes the BEC, a PL-series sensor cable, a backup cable for Pixhawk 2.1, a 5.0V output cable, a 12.0V output cable and an enclosure.
Model: Mauch 025: PL 4-14S HYB-BEC
Type: hybrid BEC
Input voltage: 4S-14S LiPo (about 14.8V-58.8V)
Outputs: 5.3V, 5.3V, 5.0V, 12.0V
Dimensions: 59 x 87 x 13mm
Weight: 72g with enclosure (without cables)
Protection: overcurrent, short circuit
1 x 025: PL 4-14S HYB-BEC (2x 5.3V / 1x 5.0V / 1x 12.0V)
1 x 040: PL-series sensor cable, 150mm
1 x 050: backup cable for Pixhawk 2.1, 150mm
1 x 5.0V output cable (red/black), Clik-Mate 1.25mm 6-pin, 150mm
1 x 12.0V output cable (white/black), Clik-Mate 1.25mm 4-pin, 150mm
1 x enclosure
Builders of complex, high-voltage UAVs who need several clean supply rails from one unit.
Four: two 5.3V, one 5.0V and one 12.0V.
4S to 14S LiPo.
A hybrid BEC.
72g with enclosure, without cables.
Overcurrent and short-circuit protection.
A sensor cable, a Pixhawk 2.1 backup cable and 5.0V and 12.0V output cables.
| Brand | Mauch |
|---|---|
| Dimensions | 59 x 87 x 13 mm |
| Input Voltage | 4S-14S LiPo (14.8V-58.8V) |
| Output Voltage | 2 x 5.3V, 1 x 5.0V, 1 x 12.0V |
| Protection | Overcurrent, short circuit |
| Weight | 72.000000 g |
| Selling unit | PCS |
