1 / 3Sold out · Ask us about restocking
Not available to order right now.
The LiPo battery tester is for 1S to 8S lithium batteries. It detects the cell voltage and total voltage automatically and supports reverse-connection protection. It works as a precise battery monitor with an LED display and a low-voltage alarm that beeps for 2 to 8 seconds.
When the voltage drops below the set value, the buzzer sounds and the red LED flashes. The tester is used for 1 to 8S LiPo, Li-ion, LiMn and Li-Fe batteries.
It is applicable to RC quadcopters, helicopters, multicopters, cars, boats and aeroplanes.
Automatic voltage detection: cell and total voltage, with reverse connection protection.
Precise display: voltage detection precision of 0.01V.
Low-voltage alarm: the buzzer sounds and the red LED flashes below the set value.
Adjustable settings: memory retained automatically; default 3.3V.
Protects the battery: helps prevent over-discharge.
Wide compatibility: 1-8S LiPo, Li-ion, LiMn and Li-Fe.
A voltage tester plugs into the balance connector on a lithium battery and reads each cell separately. This shows you at a glance whether the cells are even, and the alarm tells you when any cell has dropped too low.
Cells that are discharged below their safe minimum age faster and can be damaged, so an alarm is useful at the end of a flight and when storing packs. Set the alarm voltage to a level that leaves a safe margin and land as soon as it sounds.
Regularly checking the cell voltages of a pack also helps you spot an unbalanced or failing cell early, before it becomes a problem.
Checking LiPo packs before and after flights
Low-voltage alarm while flying or driving
Checking cell balance
Storage voltage checks
Quadcopters, helicopters, cars, boats and aeroplanes
The specification table lists a unit voltage display range of 0.5 to 4.5V, a total voltage display range of 0.5 to 36V and a 1S test mode voltage range of 3.7 to 30V. Low-voltage alarm mode is for 2 to 8S and the alarm set value range is OFF to 2.7-3.7V.
Make sure that the balance plug of your battery matches the tester's connector before plugging it in.
Voltage detection precision: 0.01V
Unit voltage display range: 0.5-4.5V
Total voltage display range: 0.5-36V
1S test mode voltage range: 3.7-30V
Low-voltage alarm mode: 2-8S
Alarm set value range: OFF-2.7V-3.7V
Default alarm: 3.3V
1 x LiPo battery tester with buzzer alarm
Drone and RC pilots who want a simple tester with a buzzer for cells from 1S to 8S.
1-8S LiPo, Li-ion, LiMn and Li-Fe.
0.01V.
The buzzer sounds and the red LED flashes when voltage drops below the set value.
3.3V.
Yes.
One LiPo battery tester.
| Brand | Generic |
|---|---|
| Cell Configuration | 1S-8S |
| Precision | 0.01 V |
| Selling unit | PCS |
