1 / 4Sold out · Ask us about restocking
Not available to order right now.
The Kingkong FLY EGG 100 is a high-performance FPV drone frame for indoor and outdoor flying. The page describes a 100 mm axis with a 2.5 mm thick carbon fiber base, reinforced with 3 mm CNC aluminum struts for durability.
It has 7075 aviation-grade aluminum side frames, motor protection covers and an LED module attachment on the rear struts. The specification table lists a tower material of CNC aluminium, a frame axis size of 100 mm or 130 mm, a frame size of 100 x 100 mm or 130 x 130 mm, a base plate of 2.5 mm, struts of 3 mm and a metallic colour. At the time of the check the page showed it as sold out at Rs 716 (SKU TIFQC0148).
100 mm axis, 2.5 mm carbon base: carbon fiber base frame and arms.
7075 aviation-grade aluminum: side frames.
3 mm CNC aluminum struts: for durability.
Motor protection covers: as listed.
LED module attachment: on the rear struts.
Indoor and outdoor FPV: compact and lightweight.
A drone frame is the skeleton that holds everything together: the arms carry the motors, the plates carry the flight controller, ESCs, battery and camera, and the whole structure must be stiff enough that vibration does not reach the gyro. Carbon fibre is the standard material because it is light and very rigid. The wheelbase, measured motor to motor across the diagonal, sets the size of propeller the frame can carry, and the arm thickness sets how well it survives crashes.
Match the frame to your parts. Check the motor mounting pattern, the flight controller and ESC stack hole spacing, the camera width, the video system you want to fly and the largest propeller the arms allow. TPU parts such as arm guards, antenna mounts and camera mounts are printed in a flexible plastic so they absorb impact. The battery strap and anti-slip pad keep the pack from moving under G-force.
Build carefully. Use thread-locking compound on the metal screws that are not in a plastic nut, keep the screw lengths from the hardware bag matched to the holes they belong in, and do not over-tighten screws into carbon fibre. Route motor wires away from sharp plate edges, mount the flight controller on soft grommets when the frame supports it, and check that nothing rubs a propeller before the first flight. After a crash, inspect the arms for cracks and replace any that are damaged.
Plan the balance of the build. A heavier battery moves the centre of gravity, so place it where the frame is designed to carry it, and keep the antenna, GPS and camera clear of the carbon plates where possible because carbon blocks radio signals.
Micro FPV
Whoop-class builds
Indoor and outdoor flying
Crash-prone flying
LED-lit builds
The page lists two sizes (100 mm and 130 mm axis), so confirm which one the kit is. The title says 100 mm.
The kit includes motor protection covers and rear struts that take an LED module.
Type: FLY EGG 100 kit
Tower material: CNC aluminium
Frame axis size: 100 mm / 130 mm
Frame size: 100 x 100 mm / 130 x 130 mm
Base plate thickness: 2.5 mm
Struts thickness: 3 mm
Colour: metallic
1 x Kingkong FLY EGG 100 100mm carbon fiber quadcopter frame kit
Micro-quad builders who want a tough 100 mm frame.
100 mm (the page also lists 130 mm).
2.5 mm.
CNC aluminum, 3 mm thick.
The page showed it as sold out.
| Brand | Kingkong |
|---|---|
| Arm Thickness | 3.000000 mm |
| Frame Type | whoop |
| Material | carbon fiber |
| Selling unit | PCS |
