1 / 5Standard checkout available. Verified maker dispatch.
The Kamoer 12V diaphragm pump is designed on the principle of a volumetric pump. The diaphragm inlet and outlet form a power-driven rear drive mechanism that pushes the piston back and forth by hydraulic pressure, moving the diaphragm to draw in and discharge liquid.
The KLP01 miniature diaphragm pump is self-priming, has low power consumption, a long life and a compact size, can run in dry conditions and has a low noise level. It uses EPDM material and supports a positive liquid pressure of up to 3 bar.
The listing gives a flow rate of 350ml/min, and it is described as suitable for laboratory and industrial liquid transfer.
Self-priming: draws liquid in without manual priming.
Low power use and long life: 10W at 12V, 0.36A.
Compact size: easy to fit into small systems.
Can run dry: tolerates dry running.
Low noise: 65dB.
EPDM material: with positive liquid pressure up to 3 bar.
High flow: 350ml/min.
A diaphragm pump has a flexible diaphragm that moves back and forth. On one stroke it draws liquid in through a check valve; on the next stroke it pushes the liquid out through another valve. Because the liquid does not touch the motor, the pump is clean, and it can also be self-priming.
In a spraying system, a small pump like this moves liquid from the tank to a nozzle or manifold. Choose the pump, tubing and nozzles so that the flow and pressure suit the application, and always flush the pump after use with clean water, especially after pumping chemicals or fertiliser.
Do not run a pump against a closed outlet for long, since this raises the pressure and can overheat the motor or damage the diaphragm.
Water and liquid transfer
Small sprayer systems
Laboratory and industrial liquid handling
Agricultural drone accessories
DIY watering and dosing projects
The specification table lists a model of KLP01-E KC 1, noise of 65dB, power of 10W and an input of 12V at 0.36A. The colour is orange.
Check that your liquids are compatible with the EPDM wetted materials before using the pump with chemicals.
Model: KLP01-E KC 1
Noise: 65dB
Power: 10W
Input voltage: 12V, 0.36A
Flow rate: 350ml/min
Material: EPDM
Positive liquid pressure: up to 3 bar
Colour: orange
1 x Kamoer 12V diaphragm pump 350ml/min liquid transfer pump
Makers, laboratories and drone spray builders who need a small, quiet, self-priming pump.
350ml/min.
12V, 0.36A.
Yes.
The listing says it can run in dry conditions.
65dB.
One Kamoer 12V diaphragm pump.
| Brand | Kamoer |
|---|---|
| Color | Orange |
| Input Voltage | 12V, 0.36A |
| Model | KLP01-E KC 1 |
| Noise Level | 65 dB |
| Power | 10W |
| Selling unit | PCS |
