1 / 2Standard checkout available. Verified maker dispatch.
The JHEMCU GHF722AIO-HD is a high-performance all-in-one flight controller for FPV drones. The page describes a powerful F7 processor combined with an integrated 4-in-1 40A ESC for smooth, responsive and reliable flight.
The feature list adds a Betaflight OSD, a barometer and a 5V BEC, and the input voltage is 2-6S. The page showed the item in stock.
F7 processor: for smooth, responsive flight.
Integrated 4-in-1 40A ESC: as listed.
Betaflight OSD: as listed.
Barometer: as listed.
5V BEC: as listed.
2-6S input: as listed.
A flight controller is the brain of a multirotor or fixed-wing aircraft. It reads the gyroscope, and where fitted the accelerometer, barometer and compass, and runs a control loop that compares what the aircraft is doing with what the pilot asks for. It then sends new speed commands to the motors through the ESCs or servos many times each second. A faster processor and a better gyro allow a higher loop rate and a more locked-in feel.
Wiring and firmware decide what the board can do. The number of UARTs limits how many receivers, GPS units, telemetry radios and video systems you can connect, the PWM or motor outputs limit how many motors and servos it can drive, and the input voltage range must suit your battery and power module. Before you buy, check that the firmware you want to run supports the board and that its mounting pattern fits your frame.
Set up carefully. Flash a firmware that is listed as supported, configure the receiver protocol, set the motor order and direction, calibrate the accelerometer and, for larger aircraft, the compass, and always test with the propellers removed first. Keep the board isolated from vibration with soft mounts where the design calls for them, and never power it with a supply that is outside the rated input voltage.
Keep the aircraft safe. Confirm your failsafe settings and arming switch before the first flight, keep a backup of your configuration, and update firmware only when you have a reason to. A flight controller is a safety-critical part, so use the wiring diagram from the maker and avoid guesswork with power connections.
FPV racing
Freestyle
2-6S builds
Altitude-aware builds
Compact AIO builds
The model is GHF722AIO-HD and the input voltage is 2-6S.
The page gives no mounting size or UART count, so check your frame and wiring needs before you buy.
Model: GHF722AIO-HD
Input voltage: 2-6S
ESC: integrated 4-in-1 40A
Processor: F7
OSD: Betaflight OSD
Barometer: yes
BEC: 5V
1 x JHEMCU GHF722AIO-HD 40A AIO flight controller
Builders who want an F7 AIO board with a 40A ESC.
2-6S.
40A 4-in-1.
Yes.
A 5V BEC.
| Brand | JHEMCU |
|---|---|
| Input Voltage | 2-6S LiPo |
| Selling unit | PCS |
