1 / 3Standard checkout available. Verified maker dispatch.
The JHEMCU GHF405AIO-HD features a powerful F405 processor, built-in 5V and 10V BEC and an integrated 40A BLHeli_S 4in1 ESC. The page says it is designed for 2-6S LiPo drones with smooth, reliable performance for FPV racing and freestyle flying.
The specification list gives the model as GHF405AIO-HD, the MCU as STM32F405 and the input voltage as 2-6S. The page showed the item in stock.
Powerful STM32F405 processor: as listed.
Built-in 40A BLHeli_S 4in1 ESC: as listed.
Dual 5V and 10V BEC: as listed.
2-6S LiPo support: as listed.
All-in-one compact design: as described.
Lightweight, durable PCB: as described.
A flight controller is the brain of a multirotor or fixed-wing aircraft. It reads the gyroscope, and where fitted the accelerometer, barometer and compass, and runs a control loop that compares what the aircraft is doing with what the pilot asks for. It then sends new speed commands to the motors through the ESCs or servos many times each second. A faster processor and a better gyro allow a higher loop rate and a more locked-in feel.
Wiring and firmware decide what the board can do. The number of UARTs limits how many receivers, GPS units, telemetry radios and video systems you can connect, the PWM or motor outputs limit how many motors and servos it can drive, and the input voltage range must suit your battery and power module. Before you buy, check that the firmware you want to run supports the board and that its mounting pattern fits your frame.
Set up carefully. Flash a firmware that is listed as supported, configure the receiver protocol, set the motor order and direction, calibrate the accelerometer and, for larger aircraft, the compass, and always test with the propellers removed first. Keep the board isolated from vibration with soft mounts where the design calls for them, and never power it with a supply that is outside the rated input voltage.
Keep the aircraft safe. Confirm your failsafe settings and arming switch before the first flight, keep a backup of your configuration, and update firmware only when you have a reason to. A flight controller is a safety-critical part, so use the wiring diagram from the maker and avoid guesswork with power connections.
FPV racing
Freestyle
2-6S builds
Builds that need a 10V BEC
Compact AIO builds
The dual BEC (5V and 10V) can power accessories such as a video transmitter. The input range is 2-6S.
The page gives no mounting size or UART count, so check your frame before you buy.
Model: GHF405AIO-HD
MCU: STM32F405
Input voltage: 2-6S
ESC: built-in 40A BLHeli_S 4in1
BEC: dual 5V and 10V
1 x JHEMCU GHF405AIO-HD F405 flight controller
Builders who want an F405 AIO board with a dual BEC.
An STM32F405.
40A BLHeli_S 4in1.
5V and 10V.
2-6S LiPo.
| Brand | JHEMCU |
|---|---|
| Input Voltage | 2-6S |
| MCU / Processor | STM32F405 |
| Selling unit | PCS |
