1 / 2Standard checkout available. Verified maker dispatch.
The JHEMCU GF30F745 60A stack combines a flight controller with a 60A ESC for FPV racing drones and mini quads. The page calls it a high-performance electronic speed controller compatible with 2-6S LiPo batteries and BLHeli_S firmware for smooth throttle response.
The title names an AM32A60 60A ESC while the description mentions BLHeli_S, and the specification table lists an input power of 3-6S against 2-6S in the features, so confirm the exact firmware and range before you buy. The package is listed as one GF30F745 60A F7 flight controller. The page showed the item in stock.
60A ESC: for FPV drones.
2-6S LiPo compatibility: as listed.
BLHeli_S firmware support: as listed.
Responsive throttle control: as described.
Advanced protection features: as listed.
For mini quads and racing: freestyle and competitive flying.
A flight controller is the brain of a multirotor or fixed-wing aircraft. It reads the gyroscope, and where fitted the accelerometer, barometer and compass, and runs a control loop that compares what the aircraft is doing with what the pilot asks for. It then sends new speed commands to the motors through the ESCs or servos many times each second. A faster processor and a better gyro allow a higher loop rate and a more locked-in feel.
Wiring and firmware decide what the board can do. The number of UARTs limits how many receivers, GPS units, telemetry radios and video systems you can connect, the PWM or motor outputs limit how many motors and servos it can drive, and the input voltage range must suit your battery and power module. Before you buy, check that the firmware you want to run supports the board and that its mounting pattern fits your frame.
Set up carefully. Flash a firmware that is listed as supported, configure the receiver protocol, set the motor order and direction, calibrate the accelerometer and, for larger aircraft, the compass, and always test with the propellers removed first. Keep the board isolated from vibration with soft mounts where the design calls for them, and never power it with a supply that is outside the rated input voltage.
Keep the aircraft safe. Confirm your failsafe settings and arming switch before the first flight, keep a backup of your configuration, and update firmware only when you have a reason to. A flight controller is a safety-critical part, so use the wiring diagram from the maker and avoid guesswork with power connections.
FPV racing
Mini quads
Freestyle
Competitive flying
60A stack builds
The page lists a 60A current rating and advanced protection features. It names both AM32 (title) and BLHeli_S (description) as the ESC firmware.
The input range is listed as both 2-6S and 3-6S, so confirm it with the seller.
Item type: flight controller
Current: 60A
Input power: 3-6S (spec table); 2-6S (features)
ESC firmware: BLHeli_S (description); AM32A60 (title)
Suits: mini quads and racing drones
1 x JHEMCU GF30F745 60A F7 flight controller
Racing builders who want a 60A stack.
60A.
The page names BLHeli_S in the description and AM32A60 in the title.
The page lists 2-6S and 3-6S.
FPV racing and mini quads.
| Brand | JHEMCU |
|---|---|
| Battery Compatibility | 2-6S LiPo |
| Selling unit | PCS |
