1 / 2Sold out · Ask us about restocking
Not available to order right now.
The iFlight Nazgul Evoque F6X Squashed X V2 Frame Kit is a durable, high-performance FPV drone frame. Its squashed X configuration optimises handling and stability for freestyle flying and racing, and it is built from premium carbon fiber.
The page's spec list is shared with the DeadCat version and prints both wheelbases: 255 mm (Squashed X) and 262 mm (DeadCat). Dimensions are L196 x W164 x H36 mm (Squashed X), arm thickness is 6 mm, the bottom plate is 3 mm, top plate 2 mm, upper plate 3 mm and camera plate 3 mm. Motor mounting is 16x16 mm and VTX mounting is 25.5x25.5 mm. The weight is 150 g excluding TPU. The page did not show the item as out of stock at ₹8,299.
Squashed X geometry: for stability and handling.
Premium carbon fiber: crash resistance and easy installation.
Vibration-dampening design: as described.
6 mm arms: with a 3 mm bottom plate.
16x16 mm motor mounting: 25.5x25.5 mm VTX mounting.
150 g: excluding TPU parts.
A drone frame is the skeleton that holds everything together: the arms carry the motors, the plates carry the flight controller, ESCs, battery and camera, and the whole structure must be stiff enough that vibration does not reach the gyro. Carbon fibre is the standard material because it is light and very rigid. The wheelbase, measured motor to motor across the diagonal, sets the size of propeller the frame can carry, and the arm thickness sets how well it survives crashes.
Match the frame to your parts. Check the motor mounting pattern, the flight controller and ESC stack hole spacing, the camera width, the video system you want to fly and the largest propeller the arms allow. TPU parts such as arm guards, antenna mounts and camera mounts are printed in a flexible plastic so they absorb impact. The battery strap and anti-slip pad keep the pack from moving under G-force.
Build carefully. Use thread-locking compound on the metal screws that are not in a plastic nut, keep the screw lengths from the hardware bag matched to the holes they belong in, and do not over-tighten screws into carbon fibre. Route motor wires away from sharp plate edges, mount the flight controller on soft grommets when the frame supports it, and check that nothing rubs a propeller before the first flight. After a crash, inspect the arms for cracks and replace any that are damaged.
Plan the balance of the build. A heavier battery moves the centre of gravity, so place it where the frame is designed to carry it, and keep the antenna, GPS and camera clear of the carbon plates where possible because carbon blocks radio signals.
Freestyle flying
Racing
6 inch builds
Custom FPV builds
Evoque platform builds
The Squashed X wheelbase is 255 mm and the dimensions are 196 x 164 x 36 mm, so use those numbers for this kit.
The package is listed as a single frame kit.
Wheelbase: 255 mm (Squashed X); 262 mm (DeadCat) also printed
Dimensions: L196 x W164 x H36 mm (Squashed X)
Arm thickness: 6 mm
Plates: bottom 3 mm, top 2 mm, upper 3 mm, camera 3 mm
Motor mounting: 16x16 mm
VTX mounting: 25.5x25.5 mm phi 1.6 mm
Weight: 150 g (excluding TPU parts)
1 x Nazgul Evoque F6X Squashed X V2 frame kit
Pilots who want a 6 inch Squashed X frame with handling and stability.
255 mm.
150 g without TPU parts.
6 mm.
16x16 mm.
| Brand | iFlight |
|---|---|
| Arm Thickness | 6.000000 mm |
| Weight | 150.000000 g |
| Wheelbase | 255.000000 mm |
| Selling unit | PCS |
