1 / 2Standard checkout available. Verified maker dispatch.
The iFlight Nazgul Evoque F6D DeadCat (DC) V2 Frame Kit is a durable and lightweight frame for serious FPV pilots. Its DeadCat configuration keeps the propellers out of view for clear footage, and it is optimised for 6-inch propellers.
The page says the V2 iteration offers improved stability and superior crash resistance. The specification list is shared with the Squashed X version: it prints wheelbases of 255 mm (Squashed X) and 262 mm (DeadCat), 6 mm arms, 150 g without TPU parts, 16x16 mm motor mounting and 25.5x25.5 mm VTX mounting. The page did not show the item as out of stock at ₹7,919.
DeadCat configuration: keeps propellers out of view.
Optimised for 6 inch propellers: as described.
V2 improvements: improved stability and crash resistance.
6 mm arm thickness: as listed.
150 g: excluding TPU parts.
16x16 mm motor mounting: 25.5x25.5 mm VTX mounting.
A drone frame is the skeleton that holds everything together: the arms carry the motors, the plates carry the flight controller, ESCs, battery and camera, and the whole structure must be stiff enough that vibration does not reach the gyro. Carbon fibre is the standard material because it is light and very rigid. The wheelbase, measured motor to motor across the diagonal, sets the size of propeller the frame can carry, and the arm thickness sets how well it survives crashes.
Match the frame to your parts. Check the motor mounting pattern, the flight controller and ESC stack hole spacing, the camera width, the video system you want to fly and the largest propeller the arms allow. TPU parts such as arm guards, antenna mounts and camera mounts are printed in a flexible plastic so they absorb impact. The battery strap and anti-slip pad keep the pack from moving under G-force.
Build carefully. Use thread-locking compound on the metal screws that are not in a plastic nut, keep the screw lengths from the hardware bag matched to the holes they belong in, and do not over-tighten screws into carbon fibre. Route motor wires away from sharp plate edges, mount the flight controller on soft grommets when the frame supports it, and check that nothing rubs a propeller before the first flight. After a crash, inspect the arms for cracks and replace any that are damaged.
Plan the balance of the build. A heavier battery moves the centre of gravity, so place it where the frame is designed to carry it, and keep the antenna, GPS and camera clear of the carbon plates where possible because carbon blocks radio signals.
Cinematic FPV
Freestyle
6 inch DeadCat builds
Clean-footage flying
Evoque platform builds
The DeadCat wheelbase is 262 mm and the dimensions are 209 x 162 x 36 mm. The motor mounting is 16x16 mm.
The spec text on the page mixes Squashed X and DeadCat figures, so use the DeadCat numbers for this kit.
Wheelbase: 262 mm (DeadCat); 255 mm (Squashed X) also printed
Dimensions: 209 x 162 x 36 mm (DeadCat)
Arm thickness: 6 mm
Weight: 150 g (excluding TPU parts)
Motor mounting: 16x16 mm
VTX mounting: 25.5x25.5 mm phi 1.6 mm
1 x iFlight Nazgul Evoque F6D DeadCat (DC) V2 frame kit
Pilots who want a 6 inch DeadCat frame.
262 mm.
6 inch.
150 g without TPU parts.
6 mm.
| Brand | iFlight |
|---|---|
| Arm Thickness | 6.000000 mm |
| Material | Carbon fiber |
| Weight | 150.000000 g |
| Wheelbase | 262.000000 mm |
| Selling unit | PCS |
