1 / 2Standard checkout available. Verified maker dispatch.
The iFlight Nazgul Evoque F5X Squashed X V2 is a durable and performance-oriented FPV drone frame. The page says its Squashed X geometry gives enhanced stability and manoeuvrability for freestyle and cinematic flying, with optimised weight distribution and crash resistance.
The specification list is shared with the DeadCat version and prints both wheelbases: 225 mm (Squashed X) and 223 mm (DeadCat). Dimensions for the Squashed X are L258 x W199 x H25 mm, the arms are 6 mm thick, the plates are 3 mm bottom, 2 mm top, 3 mm upper and 3 mm camera, motor mounting is 16x16 mm and the weight is 150 g without TPU. It takes 5-inch propellers and 20x20 mm and 30.5x30.5 mm stacks. The page did not show the item as out of stock at ₹7,489.
Squashed X geometry: for stability and manoeuvrability.
High-quality carbon fiber: with optimised weight distribution.
Quick-release arm design: as listed.
Vibration-damping camera mount: as listed.
Integrated TPU parts: including an O3 dual antenna TPU.
150 g: without TPU parts.
A drone frame is the skeleton that holds everything together: the arms carry the motors, the plates carry the flight controller, ESCs, battery and camera, and the whole structure must be stiff enough that vibration does not reach the gyro. Carbon fibre is the standard material because it is light and very rigid. The wheelbase, measured motor to motor across the diagonal, sets the size of propeller the frame can carry, and the arm thickness sets how well it survives crashes.
Match the frame to your parts. Check the motor mounting pattern, the flight controller and ESC stack hole spacing, the camera width, the video system you want to fly and the largest propeller the arms allow. TPU parts such as arm guards, antenna mounts and camera mounts are printed in a flexible plastic so they absorb impact. The battery strap and anti-slip pad keep the pack from moving under G-force.
Build carefully. Use thread-locking compound on the metal screws that are not in a plastic nut, keep the screw lengths from the hardware bag matched to the holes they belong in, and do not over-tighten screws into carbon fibre. Route motor wires away from sharp plate edges, mount the flight controller on soft grommets when the frame supports it, and check that nothing rubs a propeller before the first flight. After a crash, inspect the arms for cracks and replace any that are damaged.
Plan the balance of the build. A heavier battery moves the centre of gravity, so place it where the frame is designed to carry it, and keep the antenna, GPS and camera clear of the carbon plates where possible because carbon blocks radio signals.
5 inch freestyle
Cinematic FPV
DJI O3 builds
Squashed X handling
Evoque platform builds
The Squashed X wheelbase is 225 mm and the frame accepts 20x20 mm and 30.5x30.5 mm stacks. The VTX mounting is 25.5x25.5 mm.
The kit includes an O3 Air Unit heatsink, two O3 IPEX to RP-SMA antenna pigtails and an O3 dual antenna TPU.
Wheelbase: 225 mm (Squashed X); 223 mm (DeadCat) also printed
Dimensions: L258 x W199 x H25 mm (Squashed X)
Arm thickness: 6 mm
Plates: bottom 3 mm, top 2 mm, upper 3 mm, camera 3 mm
Motor mounting: 16x16 mm
VTX mounting: 25.5x25.5 mm phi 1.6 mm
Weight: 150 g (without TPU parts)
Propeller size: 5 inch
Stacks: 20x20 mm and 30.5x30.5 mm
1 x Evoque F5 V2 frame kit
1 x O3 Air Unit heatsink
2 x O3 IPEX to RP-SMA antenna pigtail
1 x O3 dual antenna TPU
1 x GoPro TPU base mount
1 x Screw bag
4 x TPU armguard
1 x Front bumper TPU
1 x Rear bumper TPU
2 x Anti-slip battery pad
2 x Battery strap (20x250 mm)
Freestyle pilots who want a 5 inch Squashed X frame built for the DJI O3.
225 mm for the Squashed X.
150 g without TPU parts.
5 inch.
20x20 mm and 30.5x30.5 mm.
| Brand | iFlight |
|---|---|
| Arm Thickness | 6.000000 mm |
| Weight | 150.000000 g |
| Wheelbase | 225.000000 mm |
| Selling unit | PCS |
