
Sold out · Ask us about restocking
Not available to order right now.
The HQProp 15X7X3 is a black glass fiber reinforced nylon tri-blade propeller sold as one CW and one CCW. The page describes strong thrust with smooth and efficient flight characteristics for multirotor drones.
The specification list gives a 15 inch diameter, 7 inch pitch, 3 blades, a 22 mm hub diameter, a 12 mm hub thickness, a 6 mm shaft size and a weight of 62 g per propeller. At the time of the check the page showed it as sold out at Rs 2,041.
Black glass fiber reinforced nylon: durable and stiff.
15 inch tri-blade: with a 7 inch pitch.
Strong, smooth thrust: as described.
22 mm hub, 12 mm thick: as listed.
6 mm prop shaft size: as listed.
62 g per propeller: as listed.
A drone propeller converts motor torque into thrust. Each blade is an aerofoil: as the motor spins the prop, the blades push air downward and the reaction force lifts the aircraft. Diameter and pitch set how the prop behaves. A larger diameter moves more air and suits efficient, lower-RPM flight, while a higher pitch moves the aircraft forward faster per revolution but demands more current from the motor.
Multirotors use pairs of props that spin in opposite directions. Clockwise (CW) and counter-clockwise (CCW) props cancel out the torque reaction so the aircraft does not spin, and the flight controller changes individual motor speeds to steer. Always fit each prop on the motor that turns the matching direction, and check your flight controller motor-direction settings before the first flight.
Fit and balance matter. The hub hole or shaft size must match your motor shaft, and the prop should sit flat and tight with the retaining nut fully secured. Check every blade for chips, cracks and bends before each flight, because a damaged prop causes vibration that shows up as jello in the video and extra heat in the motor. Replace props after a hard crash instead of flying on a damaged set.
Keep a few spare sets in your kit. Props are the part most likely to break in a crash, and swapping a damaged one takes only a minute. When you replace a prop, replace it with the same size, pitch and blade count as the rest of the set so that all motors produce matching thrust.
Large multirotors
Endurance builds
Heavy-lift platforms
15 inch propulsion
Replacement props
The prop shaft size is 6 mm, the hub is 22 mm across and 12 mm thick. Check your motor mount before you buy.
The set has one CW and one CCW prop.
Diameter: 15 inch
Pitch: 7 inch
Blades: 3 (tri-blade)
Material: glass fiber composite
Color: black
Rotation: CW & CCW
Hub diameter: 22 mm
Hub thickness: 12 mm
Shaft size: 6 mm
Weight: 62 g per propeller
1 x HQProp 15X7X3 propeller set (1 CW + 1 CCW)
Builders of large multirotors who need 15 inch tri-blade props.
15X7X3.
6 mm.
62 g.
1 CW and 1 CCW prop.
| Brand | HQProp |
|---|---|
| Blade Count | 3.000000 |
| Diameter | 15.000000 in |
| Hub Diameter | 22.000000 mm |
| Hub Thickness | 12.000000 mm |
| Material | glass fiber composite |
| Pitch | 7.000000 in |
| Shaft Size | 6.000000 mm |
| Weight | 62.000000 g |
| Selling unit | PCS |