1 / 4Sold out · Ask us about restocking
Not available to order right now.
This Hobbywing brushed water pump is a reliable and affordable solution for drone spraying systems. It provides a consistent liquid flow for effective crop spraying and a range of industrial uses.
The compact design and dependable performance make it a good choice for a wide range of professional UAV projects. The listing describes it as an original Hobbywing component with a durable plastic construction and low power consumption.
A sealed housing protects against water, and the listing states simple wiring and installation, so it can be swapped quickly.
Reliable, consistent flow: even liquid delivery for crop spraying.
Cost-effective: widely compatible.
Compact and lightweight: suits professional UAV projects.
Simple wiring and installation: quick to fit.
Suitable for agricultural chemicals: for a variety of liquids.
Durable plastic construction: with a sealed housing against water.
Original Hobbywing part: and low power consumption.
A spray pump moves liquid from the tank to the nozzles at a steady flow and pressure. On an agricultural drone the pump is driven from the flight battery, and the flight controller or a spray controller sets its speed with a PWM signal, so the flow can follow the drone's ground speed.
Flow rate, pressure and the number of nozzles work together. A higher flow lets a larger drone feed more nozzles, while too many nozzles for a small pump will reduce the pressure and the spray pattern. Always match the pump to the number of nozzles and the size of the tank.
Spray systems need regular care. Flush the pump, hoses and nozzles with clean water after each day of spraying, especially after fertiliser or pesticide, because residue can crystallise and block small passages. Wear suitable protective equipment when handling chemicals, follow the chemical manufacturer's label and local regulations, and never spray near people, animals or water sources.
Agricultural spray drones
Crop spraying and fertiliser application
Industrial liquid transfer on UAVs
Replacing a spray pump
Cost-sensitive drone builds
The specification table lists a brushed motor, a working voltage of 12-14S LiPo (DC 44.4-60.9V) or 18S LiPo (DC 66.6-78.3V), a rated power of 120W, a working current of up to 2.5A and a maximum flow rate of 8 L/min.
The water inlet pipe has a 14mm outer diameter. The pump weighs 698g and measures 139 x 95 x 70mm.
Model: Hobbywing brushed water pump
Motor type: brushed
Working voltage: 12-14S LiPo (DC 44.4-60.9V) / 18S LiPo (DC 66.6-78.3V)
Rated power: 120W
Working current: up to 2.5A
Inlet pipe: 14mm outer diameter
Weight: 698g
Size: 139 x 95 x 70mm
Maximum flow: 8L/min
1 x Hobbywing brushed water pump
Agricultural drone builders who want an original Hobbywing pump at a lower cost.
8L/min.
Brushed.
12-14S or 18S LiPo.
698g.
The listing calls it an original Hobbywing component.
One Hobbywing brushed water pump.
| Brand | Hobbywing |
|---|---|
| Dimensions | 139 x 95 x 70 mm |
| Max Power | 120.000000 W |
| Operating Voltage | 12-14S (DC 44.4-60.9V) / 18S (DC 66.6-78.3V) |
| Pump Type | Brushed |
| Weight | 698.000000 g |
| Selling unit | PCS |
