1 / 3Sold out · Ask us about restocking
Not available to order right now.
This high landing gear kit provides extra protection to DIY quadcopters during landing or in a crash. It is made from ABS plastic and designed for F450, F550 and SK480 quadcopter models.
The specification list gives ABS plastic, a ground clearance of 150 mm, a length of 200 mm, a weight of 75 grams per piece and M2.5 x 8 screws. It adds stability and grip on an even surface and acts as the first shield during a rough landing. The page showed only 10 left at Rs 165 (SKU TIFQC0036).
ABS plastic: material listed.
150 mm ground clearance: as listed.
200 mm length: as listed.
75 g per piece: as listed.
M2.5 x 8 screws: as listed.
For F450, F550 and SK480: compatible quadcopters.
Landing gear lifts a multirotor off the ground so the propellers, battery and camera stay clear of dirt, grass and rough landings. A taller gear also gives a gimbal or camera room to hang below the frame. The trade-off is weight and wind drag, so the gear should be strong enough for the aircraft without adding much to the takeoff weight.
Fit the gear to the frame it was made for. Check the mounting holes on the arms, the screw size and the length of the legs before you buy. The legs should be symmetrical so the aircraft sits level, and every screw should be tight and locked so that nothing loosens through vibration during flight.
Keep the gear in good condition. Look for cracks in plastic legs after a hard landing, replace any part that is bent or damaged, and re-check the screws after the first few flights. On rough ground, land gently and level, because the gear is the first part to take the impact.
Plan the balance of the build. A heavier battery moves the centre of gravity, so place it where the frame is designed to carry it, and keep the antenna, GPS and camera clear of the carbon plates where possible because carbon blocks radio signals.
F450 quadcopters
F550 hexacopters
SK480 quadcopters
DIY builds
Rough-landing protection
The page lists compatibility with F450, F550 and SK480 frames. The package includes one high landing gear kit and a bolt set.
Check that your frame arms have matching mounting holes before you buy.
Material: ABS plastic
Ground clearance: 150 mm
Length: 200 mm
Weight: 75 g per piece
Fasteners: M2.5 x 8 screws
Compatible with: F450, F550, SK480
1 x High landing gear kit
1 x Bolt set for fittings
DIY quadcopter builders who need taller landing gear for an F450-class frame.
150 mm.
ABS plastic.
75 g.
F450, F550 and SK480.
| Brand | Generic |
|---|---|
| Ground Clearance | 150.000000 mm |
| Material | ABS plastic |
| Weight | 75.000000 g |
| Selling unit | PCS |
