1 / 2Standard checkout available. Verified maker dispatch.
The HGLRC Sector D5 FR is engineered for an unparalleled freestyle flying experience and easy integration with the DJI O3 HD system. The page describes a durable 5-inch frame with excellent crash resistance and optimal weight distribution.
The specification list gives 3K carbon fiber, a 225 mm wheelbase, a 230 x 184 mm size, a 2.5 mm top plate, 2 mm middle plate and 2.5 mm bottom plate with 25 mm between top and middle plates, an FC mounting hole of 30.5x30.5 mm or 20x20 mm (M3), a 19x19 mm or 20x20 mm camera mount and a Φ16×4 motor mounting hole. The page did not show a stock status at ₹5,349.
3K carbon fiber: durable and resilient.
DJI O3 HD compatibility: as described.
5 inch propeller support: for freestyle.
225 mm wheelbase: 230 x 184 mm size.
30.5x30.5 / 20x20 mm M3 FC mounting: as listed.
TPU parts and CNC aluminum head: included.
A drone frame is the skeleton that holds everything together: the arms carry the motors, the plates carry the flight controller, ESCs, battery and camera, and the whole structure must be stiff enough that vibration does not reach the gyro. Carbon fibre is the standard material because it is light and very rigid. The wheelbase, measured motor to motor across the diagonal, sets the size of propeller the frame can carry, and the arm thickness sets how well it survives crashes.
Match the frame to your parts. Check the motor mounting pattern, the flight controller and ESC stack hole spacing, the camera width, the video system you want to fly and the largest propeller the arms allow. TPU parts such as arm guards, antenna mounts and camera mounts are printed in a flexible plastic so they absorb impact. The battery strap and anti-slip pad keep the pack from moving under G-force.
Build carefully. Use thread-locking compound on the metal screws that are not in a plastic nut, keep the screw lengths from the hardware bag matched to the holes they belong in, and do not over-tighten screws into carbon fibre. Route motor wires away from sharp plate edges, mount the flight controller on soft grommets when the frame supports it, and check that nothing rubs a propeller before the first flight. After a crash, inspect the arms for cracks and replace any that are damaged.
Plan the balance of the build. A heavier battery moves the centre of gravity, so place it where the frame is designed to carry it, and keep the antenna, GPS and camera clear of the carbon plates where possible because carbon blocks radio signals.
5 inch freestyle
DJI O3 builds
Cinematic freestyle
Aggressive flying
HD builds
The FC mounting is 30.5x30.5 mm or 20x20 mm with M3 screws and the camera mount is 19x19 mm or 20x20 mm. The kit includes TPU mounts for a GoPro, an SMA antenna, a GPS and the bottom.
The page lists a CNC aluminum frame head, TPU arm protection and footpads and two 20x250 mm battery straps.
Brand: HGLRC
Model: Sector D5 freestyle frame
Material: 3K carbon fiber
Wheelbase: 225 mm
Size: 230 x 184 mm
Top / middle / bottom plate: 2.5 / 2 / 2.5 mm
FC mounting: 30.5x30.5 mm / 20x20 mm M3
Camera mount: 19x19 / 20x20 mm
Motor mounting hole: Φ16x4
1 x 2.5 mm top plate
1 x 2 mm mid plate
1 x 2.5 mm base plate
2 x 5 mm front arm
2 x 5 mm rear arm
1 x 2.5 mm arm limit plate
2 x 2 mm camera side panel
1 x CNC aluminum frame head parts (pair)
1 x TPU GoPro holder mount
1 x TPU camera conversion board (pair)
1 x TPU SMA antenna mount
1 x TPU GPS mount
1 x TPU bottom mount
4 x TPU arm protection
4 x TPU red footpad
2 x Battery strap 20x250 mm
1 x Battery anti-slip pad
1 x Screw accessory package
Freestyle pilots who want a 5 inch frame for the DJI O3.
225 mm.
5 mm.
30.5x30.5 mm or 20x20 mm (M3).
3K carbon fiber.
| Brand | HGLRC |
|---|---|
| Material | 3K Carbon Fiber |
| Wheelbase | 225.000000 mm |
| Selling unit | PCS |
