1 / 2Standard checkout available. Verified maker dispatch.
The GEPRC SPEEDX2 0803 is an ultra-lightweight micro outrunner optimised for indoor 1S tiny whoop platforms. It has an 8 mm stator with a 3 mm height, a high-strength aluminium bell and a velocity constant of 11000 KV, which is tuned for the low voltage of a single-cell battery.
The bell is dynamically balanced at the factory, and the motor comes with high-flex coreless micro leads with pre-soldered silicone wires, which reduces the work of installing it on a small flight controller.
Input voltage is 1S lithium polymer or LiHV at a nominal 3.8 V. The shaft is a 1.0 mm integrated steel pin, and the base has a 3-hole triangle mounting pattern. GEPRC lists uses such as racing upgrades for 65 to 75 mm indoor whoop drones, custom lightweight 1S frames and experimental robotics.
Match the propeller to the 1.0 mm shaft, and pair the motor with a small 1S flight controller and ESC that can handle its current draw. With such a light motor, keep leads short and secure, and check for wire strain after crashes.
Pilots who build or repair 65 to 75 mm whoops and want a lightweight, well-balanced replacement or upgrade for indoor racing and freestyle.
Motors this small are delicate. Handle them by the base rather than the bell, check that the propeller is pushed on fully without wobble, and use foam or rubber to protect the leads where they leave the base. Replace a motor if it feels rough when you turn the bell by hand, because a damaged bearing quickly turns into a broken motor.
8 mm in diameter and 3 mm high.
A 1S lithium polymer or LiHV battery at a nominal 3.8 V.
A 1.0 mm integrated steel pin.
With a 3-hole triangle base.
Indoor whoops of about 65 to 75 mm and custom 1S frames.
| Brand | GEPRC |
|---|---|
| KV Rating | 11000.000000 KV |
| Selling unit | PCS |
