1 / 3Sold out · Ask us about restocking
Not available to order right now.
The Foxeer Mini Cat 3 Starlight is an analog FPV camera built for outstanding low-light performance. It has a 1/3 inch Sony CMOS sensor, 1200TVL resolution and a sensitivity of 0.00001 lux, which the listing says turns night into day for FPV pilots.
Low latency keeps flying responsive, the aspect ratio can be switched between 4:3 and 16:9 and a large-aperture night-vision lens (M12, 2.1mm) helps in the dark.
The camera accepts 4.6 to 20V, measures 22 x 22mm and weighs 12.2g without the cable.
Super low-light performance: 0.00001 lux starlight sensitivity.
Sony 1/3 inch CMOS: a proven sensor for night flying.
1200TVL: high resolution.
Low latency: responsive flying.
Switchable aspect ratio: 4:3 or 16:9.
Night-vision lens: M12 2.1mm large aperture.
An analog FPV camera sends a live composite video signal to the video transmitter on the drone. The image sensor turns light into an electrical signal, the camera processes it and outputs a video signal that the transmitter sends to your goggles. TVL (television lines) is a measure of horizontal resolution, and a bigger sensor usually collects more light, which helps in dim conditions.
The lens sets the field of view: a wider angle shows more of the scene and exaggerates the sense of speed, while a narrower angle shows a more natural picture. Features such as WDR (wide dynamic range) balance very bright and dark areas, DNR reduces noise and auto gain control adjusts the picture as the light changes. Low latency matters, because delay between what the camera sees and what you see makes flying harder.
Set the video standard (PAL or NTSC) to match your goggles, power the camera within its rated voltage range and mount it firmly so vibration does not blur the image. Tilt the camera up for fast, forward-pitched flying. Keep the lens clean and use a lens protector or ND filter where suitable.
Night flying and dusk freestyle
Long-range flights in low light
Racing quads with a 22mm camera mount
Low-light indoor flying
Upgrading a standard camera
The specification list gives a Sony 1/3 inch CMOS sensor, 1200TVL, 0.00001 lux minimum illumination, an input of 4.6V to 20V, a weight of 12.2g without the cable, dimensions of 22 x 22mm and an operating temperature of -10 to 50 degrees C.
The package includes the camera, a hardware set, an OSD board, a 2-pin OSD cable and a servo cable. This product page showed the item as out of stock when it was read.
Sensor: Sony 1/3 inch CMOS
Resolution: 1200TVL
Min illumination: 0.00001 lux
Lens: M12 2.1mm
Input: 4.6V-20V
Weight: 12.2g (excluding cable)
Size: 22 x 22mm
Temperature: -10 to 50 C
1 x Foxeer Mini Cat 3 starlight FPV camera
1 x hardware set
1 x OSD board
1 x 2-pin OSD cable
1 x servo cable
Analog FPV pilots who fly at night or in low light and want a 22mm camera.
0.00001 lux.
A Sony 1/3 inch CMOS.
4.6V to 20V.
12.2g without the cable.
22 x 22mm.
Yes, an OSD board and cable are included.
| Brand | Foxeer |
|---|---|
| Dimensions | 22 x 22 mm |
| Input Voltage | 4.6-20V |
| Operating Temperature | -10 to 50 C |
| Sensor | Sony 1/3 inch CMOS |
| Weight | 12.200000 g |
| Selling unit | PCS |
