1 / 3Sold out · Ask us about restocking
Not available to order right now.
The Foxeer Micro Cat 3 is an analog FPV camera made for exceptional low-light performance. With a 1/3 inch Sony CMOS sensor, 1200TVL resolution and 0.00001 lux sensitivity, the listing says it gives clear, low-noise images for night flying.
It has switchable 4:3 and 16:9 aspect ratios, a switchable PAL/NTSC system, low latency and a large-aperture night-vision lens (M12, 2.1mm). The listing adds an exclusive optimisation for LED lighting and OSD support for voltage, camera title and time.
The camera measures 19 x 19mm, weighs 10.7g without the cable and works from 4.6 to 20V.
Super low-light performance: 0.00001 lux.
Sony 1/3 inch CMOS: 1200TVL with minimal noise.
Switchable formats: 4:3/16:9 and PAL/NTSC.
LED optimisation: handles LED lighting on the aircraft or field.
OSD support: voltage, camera title and time.
Micro size: 19 x 19mm and 10.7g.
An analog FPV camera sends a live composite video signal to the video transmitter on the drone. The image sensor turns light into an electrical signal, the camera processes it and outputs a video signal that the transmitter sends to your goggles. TVL (television lines) is a measure of horizontal resolution, and a bigger sensor usually collects more light, which helps in dim conditions.
The lens sets the field of view: a wider angle shows more of the scene and exaggerates the sense of speed, while a narrower angle shows a more natural picture. Features such as WDR (wide dynamic range) balance very bright and dark areas, DNR reduces noise and auto gain control adjusts the picture as the light changes. Low latency matters, because delay between what the camera sees and what you see makes flying harder.
Set the video standard (PAL or NTSC) to match your goggles, power the camera within its rated voltage range and mount it firmly so vibration does not blur the image. Tilt the camera up for fast, forward-pitched flying. Keep the lens clean and use a lens protector or ND filter where suitable.
Night and low-light FPV flying
Micro-size builds with a 19mm mount
Flying with LED lights
Freestyle with an OSD readout
Replacing a Cat-series camera
The specification list gives a Sony 1/3 inch CMOS sensor, 1200TVL, a minimum illumination of 0.00001 lux, dimensions of 19 x 19mm, a weight of 10.7g (cable excluded), a 4.6V to 20V input and a power consumption of 95mA plus or minus 15% at 12V. The listing shows black and white variants.
The package includes the camera, four bracket screws, four gasket rings, an OSD board, a 2-pin OSD cable and a servo cable. This product page showed the item as out of stock when it was read.
Sensor: Sony 1/3 inch CMOS
Resolution: 1200TVL
Min illumination: 0.00001 lux
Lens: M12 2.1mm
Size: 19 x 19mm
Weight: 10.7g (cable excluded)
Input: 4.6-20V
Consumption: 95mA +/-15% @ 12V
1 x Foxeer Cat 3 camera
4 x bracket screws
4 x gasket rings
1 x OSD board
1 x 2-pin OSD cable
1 x servo cable
Analog FPV pilots who want a small, super low-light camera with OSD support.
0.00001 lux.
A Sony 1/3 inch CMOS.
19 x 19mm.
4.6V to 20V.
10.7g without the cable.
Yes.
| Brand | Foxeer |
|---|---|
| Dimensions | 19 x 19 mm |
| Input Voltage | 4.6-20V |
| Power Consumption | 95mA +/-15% @ 12V |
| Sensor | Sony 1/3 inch CMOS |
| Weight | 10.700000 g |
| Selling unit | PCS |
