1 / 2Standard checkout available. Verified maker dispatch.
The Foxeer Aura 3.5'' V3 is a lightweight and durable 3.5-inch frame kit for freestyle and cinematic FPV drones. The page says its unique design offers excellent protection for your electronics while providing a clean build experience.
The specifications give Toray T700 carbon with a silky coating, a 166 mm wheelbase, a middle mounting hole of 25.5 mm M2 and a rear mounting hole of 20x20 mm or 25.5x25.5 mm M2, a camera size of 19x19 or 20x20 mm and a weight of 98 g including TPU and screws. The page did not show the item as out of stock at ₹4,919.
Durable carbon fibre plates: as described.
Unique design: protects electronics for a clean build.
Toray T700 carbon with silky coating: as listed.
166 mm wheelbase: a 3.5 inch frame.
98 g: including TPU and screws.
19x19 / 20x20 mm camera size: as listed.
A drone frame is the skeleton that holds everything together: the arms carry the motors, the plates carry the flight controller, ESCs, battery and camera, and the whole structure must be stiff enough that vibration does not reach the gyro. Carbon fibre is the standard material because it is light and very rigid. The wheelbase, measured motor to motor across the diagonal, sets the size of propeller the frame can carry, and the arm thickness sets how well it survives crashes.
Match the frame to your parts. Check the motor mounting pattern, the flight controller and ESC stack hole spacing, the camera width, the video system you want to fly and the largest propeller the arms allow. TPU parts such as arm guards, antenna mounts and camera mounts are printed in a flexible plastic so they absorb impact. The battery strap and anti-slip pad keep the pack from moving under G-force.
Build carefully. Use thread-locking compound on the metal screws that are not in a plastic nut, keep the screw lengths from the hardware bag matched to the holes they belong in, and do not over-tighten screws into carbon fibre. Route motor wires away from sharp plate edges, mount the flight controller on soft grommets when the frame supports it, and check that nothing rubs a propeller before the first flight. After a crash, inspect the arms for cracks and replace any that are damaged.
Plan the balance of the build. A heavier battery moves the centre of gravity, so place it where the frame is designed to carry it, and keep the antenna, GPS and camera clear of the carbon plates where possible because carbon blocks radio signals.
3.5 inch freestyle
Cinematic builds
Compact quads
Protected electronics builds
Aura platform builds
The stack is M2 mounted (middle 25.5 mm; rear 20x20 or 25.5x25.5 mm). The camera size is 19x19 or 20x20 mm.
The kit includes side plates, antenna mounts, a protective mount, arm guards, a camera mount, screws, nuts, rivets, a battery strap and an anti-slip mat.
Material: Toray T700 carbon with silky coating
Wheelbase: 166 mm
Mounting hole: middle 25.5 mm M2; rear 20x20 / 25.5x25.5 mm M2
Camera size: 19x19 / 20x20 mm
Weight: 98 g (including TPU and screws)
4 x Arms
1 x Plates (top, centre, bottom, side)
1 x Standoffs
1 x Antenna mounts
1 x Protective mount
1 x Arm guards
1 x Camera mount
1 x Screws, nuts and rivets
1 x Battery strap
1 x Anti-slip mat
Pilots who want a light 3.5 inch freestyle or cinematic frame.
166 mm.
98 g including TPU and screws.
19x19 or 20x20 mm.
Toray T700 carbon with silky coating.
| Brand | Foxeer |
|---|---|
| Material | Toray T700 carbon with silky coating |
| Weight | 98.000000 g |
| Wheelbase | 166.000000 mm |
| Selling unit | PCS |
