1 / 4Standard checkout available. Verified maker dispatch.
The F450 4-axis quadcopter frame kit is a high-performance frame built from glass fiber with an integrated power distribution PCB and pre-threaded components for simplified assembly. It comes in black and white.
The page lists a 3 mm arm hole size, large camera mounting tabs and arm ridges that enhance forward flight stability, and describes it as easy to assemble and disassemble and suitable for hobbyists and professional drone enthusiasts. It showed 29 units at Rs 807 (SKU TIFQC0143).
High-strength glass fiber: durable for long-lasting performance.
Integrated PCB: with power distribution.
Easy to assemble and disassemble: as described.
Pre-threaded components: simplify assembly.
Large camera mounting tabs: for versatile setups.
Arm ridges: enhance forward flight stability.
A drone frame is the skeleton that holds everything together: the arms carry the motors, the plates carry the flight controller, ESCs, battery and camera, and the whole structure must be stiff enough that vibration does not reach the gyro. Carbon fibre is the standard material because it is light and very rigid. The wheelbase, measured motor to motor across the diagonal, sets the size of propeller the frame can carry, and the arm thickness sets how well it survives crashes.
Match the frame to your parts. Check the motor mounting pattern, the flight controller and ESC stack hole spacing, the camera width, the video system you want to fly and the largest propeller the arms allow. TPU parts such as arm guards, antenna mounts and camera mounts are printed in a flexible plastic so they absorb impact. The battery strap and anti-slip pad keep the pack from moving under G-force.
Build carefully. Use thread-locking compound on the metal screws that are not in a plastic nut, keep the screw lengths from the hardware bag matched to the holes they belong in, and do not over-tighten screws into carbon fibre. Route motor wires away from sharp plate edges, mount the flight controller on soft grommets when the frame supports it, and check that nothing rubs a propeller before the first flight. After a crash, inspect the arms for cracks and replace any that are damaged.
Plan the balance of the build. A heavier battery moves the centre of gravity, so place it where the frame is designed to carry it, and keep the antenna, GPS and camera clear of the carbon plates where possible because carbon blocks radio signals.
DIY quadcopters
Hobby builds
Learning to build
Camera-carrying quads
F450 platform builds
The arm hole size is 3 mm. The page does not give a wheelbase or weight, but the F450 name refers to the standard class.
The package is one F450 4-axis quadcopter frame kit.
Frame type: F450 4-axis with integrated PCB
Material: high-strength glass fiber
Assembly: easy to assemble and disassemble
Arm hole size: 3 mm
Mounting: large camera mounting tabs
1 x F450 4-axis quadcopter drone frame kit
Beginners and hobbyists who want a low-cost F450 frame with an integrated PCB.
High-strength glass fiber.
Yes, an integrated PCB.
3 mm.
The page says yes.
| Brand | Generic |
|---|---|
| Frame Type | quadcopter frame with integrated PCB |
| Material | glass fiber |
| Selling unit | PCS |
