Sold out · Ask us about restocking
Not available to order right now.
The axl Everfly 12000mAh 6S 22.2V LiPo battery has a 10C discharge rating, XT90S connector and a JST-XH balance connector. The listing describes it for high-power drones, UAVs and robotics.
This is a 61P pack: 6 cells in series, giving a nominal 22.2V, with a maximum burst discharge of 25C and a maximum charge rate of 2C.
The pack measures 175mm x 75mm x 50mm and weighs 1440g. The page showed 10 in stock.
12000mAh capacity: a large energy reserve for long flights.
6S LiPo configuration: 6 cells in series, 22.2V nominal.
10C continuous discharge: the listed continuous discharge rating.
XT90S main connector: and a JST-XH balance connector (7-pin).
Max charge rate 2C: as listed.
Premium-grade cells: rechargeable design for drones, UAVs and robotics.
A LiPo (lithium polymer) drone battery stores energy in cells connected in series. The S number is the cell count, and each cell has a nominal voltage of 3.7V, so a 6S pack is 22.2V. Capacity in mAh tells you how much energy the pack holds, and the C rating tells you how much current it can deliver: multiply the C rating by the capacity in amp-hours to get the continuous current.
Match the pack to your aircraft. The voltage must suit your ESCs and motors, the connector must match your power system and the pack must be able to deliver the current that the propulsion system draws at full throttle. A pack that is asked for more current than its rating will heat up and lose life.
Handle LiPo batteries with care. Charge them with a balance charger set to the correct cell count and current, never leave them charging unattended, store them at a partial charge, never use a swollen or damaged pack and transport large packs in a fire-resistant container. Large packs also weigh a lot, so lift and mount them securely.
Long-endurance multirotors and UAVs
Robotics and UGVs
High-voltage drone platforms
Replacing a matching Everfly pack
Field and industrial drone work
The specification list gives 12000mAh, 6S, 22.2V, a 10C discharge rating, a maximum burst of 25C and a maximum charge rate of 2C. The connector type is XT90S JST-XH (7-pin).
Check that your power system, ESCs and charger support 6S and this connector before you buy. Pack dimensions are 175mm x 75mm x 50mm and weight is 1440g, so make sure your airframe can carry and mount it.
Brand: Axldrone
Capacity: 12000mAh
Cells: 6S LiPo (61P)
Voltage: 22.2V
Discharge rate: 10C
Max burst discharge: 25C
Max charge rate: 2C
Connector: XT90S JST-XH (7-pin)
Dimensions: 175mm x 75mm x 50mm
Weight: 1440g
1 x axl Everfly 6S 12000mAh LiPo battery
Operators of 6S drones and UAVs who need a 12000mAh LiPo pack with the connector listed above.
12000mAh.
22.2V nominal (6S).
10C continuous, with a maximum burst of 25C.
XT90S JST-XH (7-pin).
1440g.
2C.
| Brand | Axldrone |
|---|---|
| Capacity | 12000.000000 mAh |
| Cell Configuration | 6S (61P) |
| Connector | XT90S JST-XH (7-pin) |
| Dimensions | 175mm x 75mm x 50mm |
| Discharge Rate | 10C |
| Nominal Voltage | 22.2V |
| Weight | 1440.000000 g |
| Selling unit | PCS |
