1 / 3Sold out · Ask us about restocking
Not available to order right now.
The EFT E6P power distribution board is a robust and efficient solution for 6-axis agricultural spraying drones. It is designed to handle high currents and distributes power cleanly to six ESCs while minimising electromagnetic interference.
The listing says its integrated design simplifies wiring and gives reliable, stable power for demanding farming and industrial UAV operations.
The technical specifications give a high current capacity of 200A continuous and 300A burst, support for 6S to 14S LiPo batteries and EMI reduction for stable performance.
Six-motor distribution: robust power distribution for 6-axis drones.
Large agricultural drones: designed for spraying platforms.
High current: 200A continuous and 300A burst.
6S to 14S LiPo: supports high-voltage batteries.
EMI reduction: minimises electromagnetic interference.
Simpler wiring: an integrated design that simplifies the harness.
A power distribution board (PDB) takes the current from the flight battery and shares it between the ESCs and other parts of the aircraft. Instead of soldering every ESC lead to a single battery lead, you solder them to wide copper pads on the board, which handles the current safely and keeps the wiring tidy. Many boards also include voltage regulators, so that a flight controller, receiver or camera can be powered from the same board.
When you choose a PDB, check that its current rating comfortably exceeds the total of all your ESCs at full throttle, that its input voltage range covers your battery and that the pad spacing and connectors match your frame and wire gauge. Solder with a hot iron and plenty of flux so that each joint flows, and cover joints with heat-shrink.
Check every joint for cold solder and shorts before you connect a battery, and use a smoke stopper for the first power-up. A small hairline crack in a solder joint can heat up under load and fail, so re-inspect the board after crashes.
6-axis agricultural spraying drones
Hexacopter industrial UAVs
High-voltage 6S to 14S builds
Heavy-lift multirotors
Replacing a damaged power board
The product page gives a continuous current of 200A, a burst current of 300A, support for 6S to 14S LiPo batteries and EMI reduction. It does not list dimensions, weight or connector types, so check the EFT documentation before planning a harness.
This product page showed the item as out of stock when it was read, so check availability before ordering.
Brand: EFT
Type: 6-axis power distribution board
Continuous current: 200A
Burst current: 300A
Input: 6S-14S LiPo
Outputs: six ESCs
Feature: EMI reduction
1 x EFT E6P power distribution board
Operators of 6-axis agricultural drones who need a high-current PDB with EMI reduction.
Six.
200A continuous and 300A burst.
6S to 14S LiPo.
6-axis agricultural spraying drones.
Yes, it minimises electromagnetic interference.
One EFT E6P board.
| Brand | EFT |
|---|---|
| Axes | 6.000000 |
| Burst Current | 300.000000 A |
| Continuous Current | 200.000000 A |
| Input Voltage | 6S-14S LiPo |
| Selling unit | PCS |
