1 / 6Standard checkout available. Verified maker dispatch.
The DS3235MG 35KG digital servo motor (270 degrees) is a high-performance digital servo for applications that need extended rotation, high torque and precise position control. It delivers up to 35kg.cm of torque with a 270-degree rotation range.
It is built with durable full-metal gears that give excellent strength, wear resistance and long-lasting performance under heavy loads. The digital control system gives fast response, smooth movement and accurate positioning.
The PWM control interface makes it easy to connect to Arduino, ESP32, Raspberry Pi, STM32 and standard RC receivers, and the rugged, water-resistant housing lets it operate in demanding environments.
35kg.cm torque: high torque for heavy loads.
270 degree range: extended rotation for robotics and mechanisms.
Metal gears: high-precision, hard-anodised gears.
Dual ball bearings: smooth and durable.
Digital control: fast response and accurate positioning.
Waterproof design: suitable for wet conditions.
Easy integration: PWM interface for common boards and receivers.
A hobby servo combines a small motor, a gearbox and a position sensor with control electronics. You send it a pulse every 20 milliseconds or so, and the width of the pulse tells it where to go: about 1.5 milliseconds is centre, with roughly 1.0 and 2.0 milliseconds at the ends. The servo drives its output shaft until the sensor says it has reached the commanded position, then holds it against the load.
Digital servos process the signal with a microcontroller and drive the motor at a much higher rate than analogue servos, which gives faster response, a smaller dead band and stronger holding torque. Metal gears cope better with shock loads than plastic ones, and ball bearings keep the shaft smooth and reduce wear.
Always power a servo from a supply that can deliver its peak current, not from a weak receiver port, and keep the linkage free so the servo never strains against a mechanical stop. A stalled servo draws a large current and can overheat within seconds.
Robotics and robot arms
RC cars and crawlers
Industrial automation
DIY electronics and Arduino projects
Mechanisms that need a 270 degree range
The specification list gives an operating voltage of 4.8 to 6.8V DC, a running range of 270 degrees, a weight of 60g, a DC motor, stainless steel and aluminium gears, a working frequency of 50 to 333Hz and a size of 40 x 20 x 40.5mm.
Check the pulse range for a full 270 degrees in your controller settings, because many boards default to 180 degrees.
Operating voltage: 4.8-6.8V DC
Running degree: 270 degrees
Weight: 60g
Motor type: DC motor
Gear type: stainless steel and aluminium
Working frequency: 50-333Hz
Size: 40 x 20 x 40.5mm
Torque: up to 35kg.cm
1 x DS3235MG 35KG digital servo motor, 270 degrees
Robotics builders and RC hobbyists who need a strong 270-degree metal-gear servo.
Up to 35kg.cm.
270 degrees.
4.8 to 6.8V DC.
The listing describes a waterproof, water-resistant housing.
Stainless steel and aluminium, described as full metal.
60g.
| Brand | DSServo |
|---|---|
| Dimensions | 40 x 20 x 40.5 mm |
| Gear Material | Metal |
| Operating Voltage | 4.8-6.8V DC |
| Rotation Angle | 270° |
| Stall Torque | 35kg.cm |
| Weight | 60.000000 g |
| Working Frequency | 50-333 Hz |
| Selling unit | PCS |
