1 / 4Sold out · Ask us about restocking
Not available to order right now.
This damping plate is a small but essential part when building a quadcopter or any RC drone with a flight controller. It protects the controller from vibration while flying and from shock on landings.
The plate absorbs vibration, with a centre-supported plate designed for sensitive electronics. The flush, flat-bottom mounting allows bolt-on or tape-style attachment, and mounting tape is included.
The listing says it works with APM, Pixhawk, CC3D, Flip32, Naze32 and Mini APM flight controllers, and with cameras such as a Mobius or GoPro.
Vibration absorption: a centre-supported plate for sensitive electronics.
Flat-bottom mounting: bolt or tape-style attachment.
Wide compatibility: APM, Pixhawk, CC3D, Flip32, Naze32 and Mini APM.
Also for cameras: Mobius or GoPro.
Complete kit: plate, four shock absorbers and tape.
Small and light: 45 x 45mm and 15g.
The accelerometers and gyros inside a flight controller pick up every vibration from the motors and propellers. Too much vibration confuses the controller and can lead to poor altitude hold, drifting or flyaways. A soft mount with dampers filters the high-frequency vibration before it reaches the sensors.
A two-part design has a bottom plate that fixes to the frame and a top plate that carries the board, with soft rubber dampers between them. The top plate floats on the dampers, so vibration is reduced.
Keep the wires loose and route them so that they do not bridge the two plates. Check the condition of the dampers from time to time, since rubber can harden or tear.
A tidy, well-built airframe flies better and lasts longer. Check every screw after the first few flights, use thread-locking compound on metal fasteners, keep wires away from moving parts and inspect the frame and accessories for cracks after any crash. Small parts like these are cheap compared with the electronics they protect, so replace them as soon as they wear out.
Isolating CC3D, Flip32 and Naze32 boards
Mini APM, APM and Pixhawk installations
Mounting a small camera
Reducing vibration in a build
Improving flight stability
The specification list gives a black colour, glass fibre material, a weight of 15g, dimensions of 45 x 45mm and suitability for CC3D flight controllers, Naze32, Mini APM and similar boards.
The package contains one damping plate and four shock absorbers.
Colour: black
Material: glass fibre
Weight: 15g
Dimensions: 45 x 45mm
Suitable for: CC3D, Naze32, Mini APM and similar flight controllers
1 x damping plate
4 x shock absorbers
Builders of small quadcopters who want to isolate a flight controller from vibration.
CC3D, Flip32, Naze32, Mini APM, APM and Pixhawk.
45 x 45mm.
15g.
Glass fibre.
By bolts or mounting tape.
One damping plate and four shock absorbers.
| Brand | Generic |
|---|---|
| Color | Black |
| Dimensions | 45 x 45 mm |
| Material | Glass fibre |
| Weight | 15.000000 g |
| Selling unit | PCS |
