1 / 3Sold out · Ask us about restocking
Not available to order right now.
The axl Carrier Board is a powerful, compact and Cube-compatible interface solution for professional drone builders and autonomous platform developers. It is engineered to integrate with the Cube flight controller ecosystem and provides dependable power management, robust communication options and flexible peripheral connectivity.
It is meant for multirotors, fixed-wing aircraft, VTOL vehicles and rovers, and gives smooth system integration, simplified wiring and stable long-term operation.
Multiple sensor and interface ports, including GPS, CAN, I2C, serial, USB and SBC connectors, enable advanced mission capabilities while keeping the board efficient and light.
Dual redundant power inputs: reliable, uninterrupted operation for mission-critical UAV and UGV use.
Comprehensive connectivity: GPS, CAN, I2C, serial, USB and SBC ports.
Servo outputs: flexible control of motors, actuators and flight surfaces.
Cube ecosystem: fully compatible with Cube flight controllers.
Compact and lightweight: 80 x 50 x 12mm and 21g.
Multi-platform: multirotors, fixed-wing, VTOL drones and rovers.
Cube-style flight controllers are small modules that hold the processors and sensors. They plug into a carrier board, which provides the connectors that link the controller to the rest of the aircraft: power, GPS, radio, motors, servos and companion computers.
Using a separate carrier board lets you choose a layout that suits the aircraft, replace the controller without rewiring and use redundant power feeds. It also gives builders of professional platforms a cleaner, more serviceable installation than a home-made harness.
Before flying, check the pin assignments in the manual, set up the firmware parameters for your outputs and test motor and servo direction with the propellers removed.
Professional multirotor and VTOL builds
Fixed-wing autonomous aircraft
Rovers and ground vehicles
Custom integration with a companion computer through the SBC port
Systems that need dual redundant power
The specification list gives a 5V power input, two power ports, eight motor outputs (M1 to M8), six AUX/servo outputs, SBus in and out, two UARTs, one I2C, one CAN, two GPS ports, one SBC port, one USB port and one buzzer port. The firmware is PX4 or ArduPilot.
The operating temperature is -10 to +80 degrees C. The package contains one carrier board.
Brand: Axldrone
Dimensions: 80 x 50 x 12mm
Weight: 21g
Power input: 5V (2 power ports)
PWM outputs: 8 motor outputs (M1-M8)
AUX/servo outputs: 6
RC input: SBus in/out
UART: 2; I2C: 1; CAN: 1; GPS: 2
Companion computer: 1 SBC port
USB: 1; buzzer: 1
Operating temperature: -10 to +80 C
Firmware: PX4 / ArduPilot
1 x axl carrier board
Professional builders who use a Cube flight controller and need a compact carrier board with redundant power.
Cube-compatible flight controllers.
Eight (M1 to M8), plus six servo outputs.
Yes, dual redundant power inputs.
PX4 or ArduPilot.
80 x 50 x 12mm and 21g.
One axl carrier board.
| Brand | Axldrone |
|---|---|
| Compatible Flight Controllers | Cube |
| Dimensions | 80 x 50 x 12 mm |
| Firmware | PX4 / ArduPilot |
| Input Voltage | 5V |
| Operating Temperature | -10 to 80 C |
| Weight | 21.000000 g |
| Selling unit | PCS |
