1 / 3Sold out · Ask us about restocking
Not available to order right now.
The Caddx Walnut is a lightweight (62.8g) action camera that records 4K video at 60fps with a 150-degree wide field of view. The listing says built-in electronic image stabilisation and Gyroflow support give very smooth footage, and an IP64 rating suits the demands of FPV flying.
A 1/2.3 inch HDR sensor gives good dynamic range, and the wide lens is described as having ultra-low distortion. A built-in 600mAh battery gives up to about 30 minutes of 4K/60fps recording.
The camera can be started and stopped from the flight controller through a KEY signal line, and it uses a magnetic connector for charging and data transfer.
4K at 60fps: up to 100Mbps MP4 video.
EIS and Gyroflow: built-in stabilisation and support for post-stabilisation.
IP64 rating: waterproof and dustproof.
Magnetic charging and data: a quick, robust connection.
Remote control: start and stop from the flight controller.
1/2.3 inch HDR sensor: 150 degree FOV and low distortion.
600mAh battery: up to 30 minutes of 4K/60fps recording.
An FPV action camera records video onto the aircraft, separate from the live FPV feed you fly with. That gives you a clean, high-quality recording to watch or edit later. Electronic or gyro-based stabilisation smooths the footage, and post-processing software such as Gyroflow can use the recorded gyro data for even smoother results.
Use a fast memory card, start recording before take-off, and check the temperature and battery on long flights. Power the camera within its voltage limits, using the supplied step-down module if you run it from a flight battery, and mount it firmly to limit vibration and jello.
Set the video standard (PAL or NTSC) to match your goggles, power the camera within its rated voltage range and mount it firmly so vibration does not blur the image. Tilt the camera up for fast, forward-pitched flying. Keep the lens clean and use a lens protector or ND filter where suitable.
4K FPV freestyle and cinematic footage
Gyroflow post-stabilisation
Wet or dusty conditions
Recording controlled from the flight controller
Long recording sessions
The specification list gives the model CADDX Walnut, a 1/2.3 inch HDR sensor, a weight of 62.8g, dimensions of 38 x 38 x 36mm, a 150-degree FOV, a maximum bitrate of 100M, a 600mAh battery, an SD card up to 256GB, MP4 video and an IP64 rating.
The package includes the camera, a USB magnetic connector, a mounting case, a 2 to 6S buck module, an SH1.25 3-pin silicone line, an M5 screw, a Type-C cable, a mirror cloth and a storage bag. This product page showed the item as out of stock when it was read.
Model: CADDX Walnut
Sensor: 1/2.3 inch HDR
Video: up to 4K at 60fps, MP4, max bitrate 100M
FOV: 150 degrees
Stabilisation: EIS; Gyroflow support
Waterproof: IP64
Battery: 600mAh
SD card: up to 256GB
Weight: 62.8g
Size: 38 x 38 x 36mm
1 x Walnut action camera
1 x USB magnetic connector
1 x mounting case
1 x 2-6S buck module
1 x SH1.25 3-pin silicone line
1 x M5 screw
1 x Type-C cable
1 x mirror cloth
1 x portable storage bag
FPV pilots who want a rugged 4K action camera with Gyroflow and flight-controller control.
Up to 4K at 60fps.
It has an IP64 rating.
Up to about 30 minutes at 4K/60fps.
62.8g.
Yes.
Through the supplied 2-6S buck module.
| Brand | Caddx |
|---|---|
| Battery | 600mAh |
| Dimensions | 38 x 38 x 36 mm |
| Field of View | 150.000000 deg |
| Sensor | 1/2.3 inch HDR |
| Weight | 62.800000 g |
| Selling unit | PCS |
