1 / 4Sold out · Ask us about restocking
Not available to order right now.
The CADDX Nebula Pro Nano (black) is an ultra-light, high-definition digital optics module for micro tiny whoops and compact toothpick FPV frames. The listing says it is optimised for use with the Caddx Vista and DJI Air Unit transmission links.
It outputs a high-frame-rate 120fps digital feed with low-latency tracking modes and weighs about 3.5g, so it does not upset the balance of a small frame.
The aspect ratio can be scaled between 4:3 and 16:9, and the module sits in a rugged all-black nano casing.
120fps digital feed: low-latency digital tracking modes.
About 3.5g: keeps small frames balanced.
Adjustable aspect: 4:3 or 16:9.
1/3 inch CMOS: high-sensitivity sensor at 720p 120fps.
2.1mm lens: 150 degree diagonal FOV.
Nano casing: rugged and 14 x 14mm.
A digital FPV camera passes its picture to a digital video system instead of producing an analog composite signal. The result is a sharper, cleaner image, with the trade-off that the camera must match the video system you use, such as DJI, HDZero or Walksnail.
Low latency is critical for flying, so digital cameras and links are built to keep the delay as small as possible. Pick the field of view, aspect ratio and mounting angle for your flying style and check that the connector and voltage match your air unit.
Set the video standard (PAL or NTSC) to match your goggles, power the camera within its rated voltage range and mount it firmly so vibration does not blur the image. Tilt the camera up for fast, forward-pitched flying. Keep the lens clean and use a lens protector or ND filter where suitable.
Tiny whoops and toothpick drones
Caddx Vista and DJI Air Unit builds
High-frame-rate FPV flying
Weight-critical nano frames
Replacing a nano digital camera
The specification list gives the Nebula Pro Nano series, a 1/3 inch high-sensitivity CMOS sensor, 720p at 120fps, a 2.1mm lens, a 150-degree diagonal FOV, dimensions of 14 x 14mm and a weight of about 3.5g.
The package is a 14mm Nebula Pro Nano camera module with an extension bracket kit for 19 x 19mm mounting. The page did not show a stock status.
Brand: Caddx FPV
Model: Nebula Pro Nano series
Sensor: 1/3 inch CMOS
Resolution: 720p @ 120fps
Lens: 2.1mm; FOV 150 degrees diagonal
Size: 14 x 14mm
Weight: about 3.5g
1 x Nebula Pro Nano camera module
1 x extension bracket kit for 19x19mm mounting
Owners of Caddx Vista or DJI Air Unit micro builds who want a light 120fps camera.
720p at 120fps.
About 3.5g.
150 degrees diagonal.
Caddx Vista and DJI Air Unit links.
14 x 14mm.
Yes, an extension bracket kit is included.
| Brand | Caddx |
|---|---|
| Dimensions | 14 x 14 mm |
| Field of View | 150.000000 deg |
| Sensor | 1/3 inch CMOS |
| Weight | 3.500000 g |
| Selling unit | PCS |
