1 / 3Sold out · Ask us about restocking
Not available to order right now.
The BGM5208-200 is a brushless gimbal motor with a 200KV rating and a 52mm stator diameter. It is designed for camera stabilisation on RC drones, FPV platforms, handheld gimbals and multi-axis systems that need smooth, precise, low-speed torque with minimal noise.
The motor uses a multi-pole, fine-winding design that minimises cogging torque and delivers smooth continuous torque near zero speed. The listing says it suits action cameras, mirrorless cameras and compact cinema cameras in the 200g to 600g payload range.
The stator format is 5208 (52mm diameter and 8mm length), and the low KV rating gives high torque per ampere at low PWM duty cycles.
Gimbal-optimised design: multi-pole, fine-winding architecture for minimal cogging torque.
200KV rating: high torque per ampere at low PWM duty cycles.
5208 stator format: 52mm stator diameter and 8mm length.
Low noise operation: smooth stabilisation.
Wide use: RC drones, 3-axis gimbals and handheld stabilisers.
Camera range: action, mirrorless and compact cinema cameras of 200g-600g.
A brushless gimbal keeps a camera pointing steadily while the aircraft moves. A controller board reads an inertial sensor mounted on the camera and drives brushless motors on each axis to cancel out any rotation. Because gimbal motors are wound for smooth, low-speed torque and not for speed, they hold the camera steady with very little vibration and noise.
Gimbal quality depends on the whole system: balance, damping and controller tuning matter as much as the motors themselves. A camera that is not balanced on its axes forces the motors to work harder, heats them up and can cause jitter, so balance the camera carefully before you tune anything.
Also isolate the gimbal from airframe vibration with soft damping mounts, keep motor wires away from the sensor and never power the gimbal with the camera locked or blocked, as the motors can overheat when they cannot move.
3-axis gimbals for mirrorless and compact cinema cameras
Handheld stabilisers
Aerial camera platforms
Action camera stabilisation
Custom multi-axis systems
The specification table lists a brand of DYS, 200 turns, 0.27mm wire, 14 poles and 12 slots, a shaft of 7.0mm outer and 5.0mm inner, a weight of 178.2g, a motor size of 63 x 24mm, a pull of 1510 and a resistance of 17.2 milliohms.
The package includes one DYS BGM5208 motor and a hardware pack with screws and nuts.
Brand: DYS
KV rating: 200KV
Turns: 200T
Wire size: 0.27mm
Poles: 14P
Slots: 12
Shaft: 7.0mm outer / 5.0mm inner
Weight: 178.2g
Motor size: 63 x 24mm
Resistance: 17.2 milliohm
Camera class: DSLR / 200g-600g payload
1 x DYS BGM5208 motor
1 x hardware pack (screws, nuts)
Gimbal builders who need a high-torque motor for mirrorless and compact cinema cameras.
200KV.
Cameras in the 200g to 600g range.
14 poles and 12 slots.
178.2g.
The motor and a hardware pack of screws and nuts.
63 x 24mm.
| Brand | Readytosky |
|---|---|
| Dimensions | 63 x 24 mm |
| KV Rating | 200.000000 KV |
| Motor Poles | 14P / 12 slots |
| Weight | 178.200000 g |
| Selling unit | PCS |
